Recommended Trailer Hitch Receiver For 2021 Ford Bronco Class III

Question:

Do you have any trailer hitches for the new 2021 Ford Bronco?

asked by: Jonas G

Expert Reply:

There are a couple of options for hitches that fit the new 2021 Ford Bronco, both are Class III. The Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR, and the Curt Trailer Hitch Receiver # C76WR. Each of these options install in the same way and are possibly one of the easiest hitches to install on newer vehicles. These options simply bolt to the bumper beam using 4 ea. 1/2" hex head bolts that feed thru the hitch and holes that already exist in the vehicles beam. The needed hardware is included with both options. Please note the attached images.

We always suggest that you refer to your specific vehicles owners manual for towing and cargo specs. From numbers available to me however, it appears that most all trim packages on the Ford Bronco have a maximum towing capacity of 3,500lbs.

The Curt Trailer Hitch Receiver # C76WR, has a maximum gross trailer weight of 3,500 lbs. and a max GTW of 350 lbs.

The Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR, has a maximum gross trailer weight of 4,000 lbs. and a max GTW of 400 lbs.

Please remember that the lowest max rating of any component is the limitation for towing. So even though the Draw-Tite options is rated slightly higher, you will still be limited by the max towing spec of the vehicle itself.

Each option is quality made and will serve you well with hauling a trailer or accessories such as cargo carriers and bike racks. The Curt option is a Made in USA product (hardware is not) while the Draw-Tite is imported.

The Draw-Tite has a longer tube than the Curt so if you will use primarily for accessories, cargo carrier and bike racks, this couple of inches may be preferred. It also however means greater opportunity to do the trailer hitch shin smash. But another nice thing about the Draw-Tite is that it has a small tab included welded on the left side for mounting a 4-flat, that's a nice thought out feature.

Overall both will serve equally well but personally I would go with the Curt, # C76WR just because I'd prefer the hitch to set back a little more.