Parts Needed to Use etrailer SD Tow Bar with Roadmaster Base Plates on 2016 Mini Countryman
Question:
Is this compatible with Roadmaster Direct Connect Base Plate KIt RM-521883-5?
asked by: Tricia
Helpful Expert Reply:
Yes. But in order to use the etrailer SD Non-Binding Tow Bar # e74ZR with the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521883-5 you'll also need the Replacement Base Pins with Chains and Clips for Roadmaster Tow Bars - Qty 2 # RM-910029 to replace the base plate pins on the tow bar. This configuration will work together though without problems.
The etrailer SD Non-Binding Tow Bar # e74ZR does come with safety cables integrated, which means that in order to complete your flat towing setup for a 2016 Mini Countryman you'll only need tow bar wiring, supplemental braking and possibly a high/low adapter to keep the tow bar level during towing. For the tow bar wiring I recommend using the Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-15247 since it comes with diodes included to help prevent back feed from damaging the RV's electrical system in the event of a short.
For a supplemental braking solution, which is required by law in most states and provinces, I recommend using the Blue Ox Patriot Portable Braking System - Proportional # BLU37TR since it provides smooth proportional braking for your toad that can be transferred easily to a new vehicle if need be.
In addition to the installation videos that are linked to this answer, I've also linked a helpful article that explains how to measure to determine if a high/low adapter will be needed, as well as our entire selection of adapters for you to check out.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Replacement Base Pins with Chains and Clips for Roadmaster Tow Bars - Qty 2
- Accessories and Parts
- Tow Bar
- Pins and Clips
- Roadmaster
more information >
Product Page this Question was Asked From
etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates - RV Mount - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Parts Needed to Flat Tow 2020 Ford Escape Hybrid
- Q&A: Possible Base Plate Installers Near Visalia CA
- Q&A: Is The Curt C96JR Tail Light Kit Compatible With A Brake Buddy Brake System?
- Article: Must-Have Flat Towing Components
- Q&A: Recommended Flat Towing Setup For A 2023 Jeep Wrangler 4XE
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Article: Trailer Wiring Diagrams
- Article: How Level Should a Tow Bar Be When Flat Towing
- Q&A: Will The Blue Ox Baseplate Kit # BX1298 Fit A 2006 Ford Explorer
- Q&A: Diode Tow Bar Lighting Kit that Fits 2024 Jeep Wrangler Flat Towed Behind Motorhome
- Article: How to Choose a High-Low Adapter
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Flat Towing Package for 2012-2014 Honda CR-V