Replacement Interior Wear Components For Dexter 8-248 Idler Hub
Question:
I have a model 8-248 hub with a 4 3/4 bolt pattern for my utility trailer and Im looking to replace the interior parts. Will you help me with this? Thanks
asked by: Randy
Expert Reply:
Your Dexter 8-248 Hub # 845475UC1 uses the following interior parts.
Inner Bearing # L68149
Inner Race # L68111
Outer Bearing # L44649
Outer Race # L44610
Grease Seal # 58846
Grease # L11390
Depending of if you have a standard spindle or E-Z lube spindle there are different grease caps available.
Grease Cap # F001518 standard spindle
Bearing Buddy # BB1980A upgrade to standard spindle
Grease Cap # DC200L-DCRP for E-Z lube spindle
And finally there are different nut retainer based on your spindle.
Cotter Pin # 165649 standard spindle
Spindle Washer # 5-101 E-Z Lube Spindle
Nut Retainer # 6-190 E-Z Lube Spindle
(click to enlarge)
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Suspension Parts
- Cotter Pin
- ABS Fasteners
more information >
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Nut Retainer for 6-191 Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut Retainer
- 1 Inch I.D.
- Dexter
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Grease Cap - 1.988" Outer Diameter - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement for Dexter 8-248 Idler Hub
- Article: Trailer Tire Sizing
- Q&A: Replacement Trailer Hub for Dexter 8-248
- Q&A: How to Determine Hub and Spindle Size
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: What is Maxx Coat on DeeMaxx Disc Brake Kit and Why is There a Mix of That and Stainless Steel
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Bearing Kit Recommendation for Dexter 8-248 Hub
- Article: Trailer Lighting Requirements