Replacement Hubs for an EZ Loader Trailer
Question:
I have a 1987 EZ Loader trailer, M80 5.2 2200# Will the Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 Item # 8-258-5UC1-EZ fit this trailer? Do I also need to purchase Bearing Buddy or equivalent caps? thanks
asked by: Kevin G
Expert Reply:
With your trailer being from 1987, I strongly suggest pulling one of your current hubs off to make sure the bearing match the Dexter Trailer Idler Hub Assembly # 8-258-5UC1-EZ. This will use an # L44649 inner and outer bearing that has a 1.063" inner diameter. As long as your bearings match this, you will be good to go. This will also have the EZ-Lube cap to get access to the zerk/grease fitting on the end of an EZ-Lube spindle.
However, if your spindles do not have this fitting and you wanted to add the Bearing Buddy system to the hubs, you will need the Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair) # BB1980A.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Availability of Hubs that Fit 2,200 lb Lippert Axle Spindles
- Q&A: Recommended Spring Seat for a 2,200 lbs Axle w/ a 1-3/4" Diameter
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Recommended 5 on 4-1/2 Idler Hub for a Dexter D20 Axle
- Article: Most Popular Wheel Bearings
- Q&A: Agricultural Hub Replacement with 6 on 6 inch Bolt Pattern and Bearings LM67048 and 25580
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Article: My Trailer Hitch Doesn't Fit
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub