What Size Bolts Hold Tow Hooks on 2009 Toyota FJ Cruiser in Place
Question:
What is the size of the 4 bolts that replace the transport hook bolts. Bolt holes have some rust in them and I want to run a tap through before receiving the hitch I ordered. I want to be ready for install. Thank you.
asked by: Darryn A
Expert Reply:
The bolts holding the tow hooks in place are M12x1.25. I've linked to the install instructions for the Curt # 13367 hitch you'd looked at.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like part # 118405, a ball mount like part # 2753 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball.
I've linked to installation videos for the hitch and the trailer wiring harness.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Choosing a Transmission Cooler for a 2019 Jeep Grand Cherokee
- Q&A: Does Flex-a-lite Transmission Cooler # FLX400117 Come with All Components Needed to Install
- Q&A: What Transmission Cooler do You Recommend for My 2017 Toyota Sienna?
- Q&A: Can A Motorcycle Be Carried On the Back of a 2007 Toyota FJ Cruiser
- Article: Rooftop Cargo Carriers
- Q&A: Which Class III Trailer Hitch Receiver for 2008 Toyota FJ Cruiser
- Q&A: Would a Rear Skid Plate Have to Get Removed to Install Hitch on FJ Cruiser
- Article: Trailer Wiring Diagrams
- Article: What Do I Need To Tow A Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)