Which Nuts Needed to Complete Brake Controller Connections At Fuse Box on 2007 GMC Sierra New Body

Question

Question:

What size nut do I need to connect the wires to the stud for the trailer brake system for a 2007 gmc Sierra new body?

asked by: Tiffanie T

0

Expert Reply:

There are two threaded studs on the front of the power distribution box (closest to the front bumper) that will need to have the 12-V feed to the trailer connector and the power feed to the brake controller connected if they aren't already. As you've likely found, GM decided to save the $ 0.25 it would have cost them to supply the nuts needed to secure the wires to the studs. Both studs are different sizes, you'll need a M6-1.0 nut which we carry as part # 185916 and an M8-1.25 nut which is available as part # 185917.

expert reply by: Mike L

0

Answer 1

As it seems you already know, when installing a trailer brake controller on your 2007 GMC Yukon you will need to locate the two wires under the hood that need to be connected to fully activate the vehicle's tow package. One is the power wire…

view full answer...

Answer 2

We have an FAQ article that will help with your 2011 Chevy Silverado. I have included some excerpts from it below and I have included a link to it for you. In addition to these steps, you will want to check the vehicle owners manual for the…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C, part…

view full answer...

Answer 6

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 7

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 8

The Loadstar ST235/75R15 Radial Off-Road Tire w/ 15" Black Mod Wheel item #KE88JR will work great as a spare tire for your Rove 14FL travel lite trailer. It weighs 66 lbs. The wheel tire combo does not come balanced but you can use the…

view full answer...

Answer 9

The Dometic 300 Toilet, #DOM64FR has a total length of 19-3/4" with a minimum distance from wall to center of 8-1/2". The Dometic 320, #DOM87FR is overall length of 22" with a minimum distance from wall to center of 11". If you…

view full answer...

Answer 10

To replace the controller for the Replacement Vacuum Generator for Dometic VacuFlush RV Toilet #DOM46FR you need the Replacement Touchpad for Dometic VacuFlush and MasterFlush RV Toilets #DOM36FR.

view full answer...

Answer 11

Nope, you do not need to purchase a wax ring to install the Dometic 310 Part-Timer RV Toilet - Standard Height - Round Bowl - Slow Close Lid - White Ceramic #DOM57FR.

view full answer...

Answer 12

I agree, that note doesn't make sense. When I reached out to my contact at MORryde they said the MORryde RV Generator Slide Out Tray #MR79RR doesn't have a stopper for when the tray is in the fully opened position so you just need to make…

view full answer...

Which Nuts Needed to Complete Brake Controller Connections At Fuse Box on 2007 GMC Sierra New Body

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching