Winch Cable Replacement Recommendation for a Warn 2.5ci for Towing a Kubota RTV UTV
Question:
I have a Warn 2.5 ci winch mounted on a Kubota RTV UTV. I need to replace the wire rope. It has 50 ft of 3/16 cable. Can I use this 60 ft or do I have to stay with 50 ft? Will this or the 50 ft mount on the Warn, is the non hook end ready to use? Thanks.
asked by: Jim M
Expert Reply:
When replacing the cable on your Warn 2.5ci, you have to stay with the 45 ft cable, such as Bulldog Winch # BDW20222 that you referenced. I spoke to my contact at Warn and he said the drum on your winch cannot hold any more than 50 feet.
The non hook end is a severed blunt end and would be ready to install on your winch.
If you need additional tow length, I recommend the 20 ft Tow Strap by Erickson # EM59798. This strap has a 22,500 lb break strength and 10,000 safe working load limit.
Products Referenced in This Question
Erickson Recovery Strap w/ Twisted Loop Ends - 3" x 20' - 10,000 lbs Max Vehicle Weight
- Tow Straps and Recovery Straps
- Recovery Strap
- Polyester
- 20 Feet Long
- 3 Inch Wide
- Standard Loops
- Standard Duty
- Erickson
more information >
Product Page this Question was Asked From
Replacement Wire Rope for Bulldog Winch Trailer Winch - 3/16" x 45'
- Accessories and Parts
- Electric Winch
- Ropes
- 3/16 Inch Diameter
- Wire Rope
- 45 Feet Long
- Bulldog Winch
more information >
Continue Researching
- Q&A: Weight Capacity of Dutton-Lainson Hand Winch # DL11001 Using 1/4 Inch Cable
- Q&A: How To Bleed Demco DA86 Hydraulic Brake Actuator
- Q&A: How to Install Cable to Split Drum Winch With Hook on Either End of Cable
- Q&A: Will Bulldog Winch Cable BDW20222 Fit on Superwinch LT3000
- Q&A: What Brake Fluid Should be Used in Surge Brake Actuators
- Article: 2023 Best Gifts for Auto Enthusiasts