Hitch With Best Ground Clearance for 2021Honda Odyssey
Question:
I'm wanting a hitch for 2021 Honda Odyssey but I need the best ground clearance. Which hitch has the most ground clearance?
asked by: Bart A
Expert Reply:
Of the various hitch options available for a 2021 Honda Odyssey, The Curt Class III hitch, part # C64NR would offer about 11-3/4 inches of clearance under the lowest point of the hitch, while the rest would offer about 10 to 10-1/2 inches. This hitch is also mostly concealed behind the bumper, only the receiver tube and the safety chain hoops will be visible.
If you're concerned about the hitch contacting the pavement when pulling in/backing out of steep driveways, a hitch protector/roller like part # RM-050 would contact the pavement before the hitch and would roll right over any obstacles. The roller can be used with or without a hitch accessory installed.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like part # 118781, a ball mount like part # 2753 and a trailer ball like part # 19260 for a 1-7/8 inch or # 63845 for a 2 inch trailer ball.
Products Referenced in This Question
T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Roadmaster Rollaway Trailer Hitch Protector
- RV Skid Wheels
- Hitch Mount
- Bolt-On
- Roadmaster
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Trailer Wiring Harness Recommendation for a 1999 Isuzu NPR
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement Strut for Stabilus Lift-O-Mat on Dometic Awning
- Q&A: Brake Controller Installation on 2016 Mercedes-Benz Sprinter
- Q&A: Installation of Slipper Spring with Open Eye End
- Q&A: Parts Needed to Flat Tow 2023 GMC Yukon XL Denali
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Wiring Diagrams
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing