Westin HDX Grille Guard Replacement Hardware And Brackets For 2015 Chevrolet Silverado 1500

Question

Question:

Will the replacement hardware kit for Westin HDX grille guard fit a 2015 Chevy Silverado 1500?

asked by: Jeff C

0

Expert Reply:

It appears you have the Westin HDX Grille Guard with Punch Plate - Polished Stainless Steel # 57-3680 designed to fit 2014 and newer Chevrolet Silverado 1500's. The correct replacement hardware is, the Replacement Mounting Hardware Kit for Westin HDX Grille Guard with Punch Plate # 57-368PK.

expert reply by: Bryce D

0

Answer 1

The replacement mounting brackets for the Westin HDX Grille part #57-3785 that you referenced is the part #57-378PK which would fit the stainless steel or black version of this guard.

view full answer...

Answer 2

Part #57-378PK replaces the hardware and mounting brackets for a Westin HDX Grille Guard with model number #57-3780 and #57-3785, which are designed for a 2015-2019 Silverado 2500/3500, so it will not fit your truck. Hardware kits for grille guards…

view full answer...

Answer 3

The confirmed fit for your 2005 Chevy Silverado is the Westin HDX Grille Guard with Punch Plate - Black Powder Coated Steel #57-1175 which seems to match your description for at least the lower section. If this is the model you will need the…

view full answer...

Answer 4

The install hardware for a Westin HDX grille guard for a 2015 Chevy Silverado 1500 is the part #57-368PK since the guard that fits your truck is part #57-3685. You should note that this guard is not a fit for a Suburban so what you have now most…

view full answer...

Answer 5

We have the solution for you. To attach the Westin HDX Grille Guard with Punch Plate part #57-3875 to your 2017Chevrolet Silverado 1500 you want the Replacement Mounting Brackets and Hardware for Westin HDX Grille Guard part #57-387pk. This kit is…

view full answer...

Answer 6

Since the correct Westin HDX Grille Guard for your 2021 Chevy Silverado 1500 is the part #57-3955 the correct replacement hardware kit would actually be the part #W78XV.

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Westin HDX Grille Guard Replacement Hardware And Brackets For 2015 Chevrolet Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching