How To Connect The iRV63 RV Stereo System To Your TV

Question

Question:

Irv 63 2021 raptor can my tv play sound through this stereo?

asked by: Chris

0

Expert Reply:

The iRV RV Stereo # IRV64FR can play audio from your TV using the HDMI and RCA ports and switching the stereo to those inputs. I recommend using an HDMI cable # 324-000008 as this will produce the best quality sound but you can also use RCA cables # DG52486PB as well.

expert reply by: Kevin C

0

Answer 1

Yes, the HDMI plug on the iRV RV Stereo #IRV64FR will plug into a tv or monitor. You can use the RCA connections if needed, but it is not required.

view full answer...

Answer 2

I have a few options to replace the iRV33 Stereo. The iRV RV Stereo part #292-101079 you mentioned would require you to enlarge the cutout as well as hardwire the wiring harness which is pretty common for stereo installations. If you are looking for…

view full answer...

Answer 3

iRV RV Stereo, #IRV64FR that you linked your question to does support 3-Zone output, which allows you to play audio in 3 separate areas. This can be done simultaneously, or separate from the other two zones by use of the zone buttons on the right…

view full answer...

Answer 4

The Drive RV Stereo part #324-000031 has one zone with a max output of four speakers. Therefore, this would not be a good replacement for an iRV RV Stereo part iRV33. Furthermore, you would actually need a double din not a single din like the above.…

view full answer...

Answer 5

The Furrion RV Stereo, #DV1230BL is a very straight forward installation but it will not be as simple as plug and play between this and the #DV3300SBL. Please see the attached links to product review and installation video.

view full answer...

Answer 6

The iRV RV Stereo w/ DVD Player #IRV64FR has a yellow 12v power wire that's intended to provide power to the stereo to retain the memory so that your preset stations and clock are there when you turn the stereo on. The red ACC wire is to power…

view full answer...

Answer 7

The right and left side have a smaller panel concealing the screws. I've included a picture with the Jensen RV Stereo #JWM70A without the small panels I'm talking about. Pop them out to access the screws.

view full answer...

Answer 8

I suggest using a multimeter, such as the #PTW1714, to verify that a full 12V is live at the connection point for the iRV RV Stereo, #IRV64FR. If you do have proper voltage present and all connections are made per installation instructions with…

view full answer...

Answer 9

From our research the iRV RV Stereo part #IRV64FR is a great replacement for the Concertone ZX75. The Concertone cut out measures 7.60" wide x 6.70" tall x 1.60" deep according to the manual. The iRV RV Stereo requires a 6-11/16"…

view full answer...

Answer 10

Great news! The install of the RV Stereo #IRV64FR that you referenced would be plug and play as the wiring diagrams and connectors are the same. Also you can use RCA outputs for a television too like you prefer. I attached a wiring diagram for this…

view full answer...

Answer 11

The iRV Stereo part #IRV64FR would be a great option to replace the Genesis GT 2.0 you have in your Keystone Outback. It's loaded with features like 3 zone volume control, can play CDs, DVDs, MP3 format files, has HDMI outputs etc.

view full answer...

Answer 12

I've attached a wiring diagram below for your Touch Audio VD-300i. When you pull the stereo out there will most likely be a fuse on the 12v power wire. This is pretty typically for all stereos and most likely yours gave out and just needs to be…

view full answer...

How To Connect The iRV63 RV Stereo System To Your TV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching