Does The DeeZee Truck Bed Mat Come Pre-Cut For Gooseneck Hitch On 2021 Ford F-350?

Question

Question:

I have a factory goose neck hitch, is the mat designed with holes for the receiver ball and safety chain eyes?

asked by: Norris W

0

Expert Reply:

The DeeZee Custom-Fit Truck Bed Mat # DZ87011 that you were looking at would need to be cut in order to have access to your gooseneck hole in the bed of your 2021 Ford F-350. This does not have pre-cut holes for gooseneck or 5th wheel, nor do any other truck bed mats for your truck.

This is a very high quality anti-slip mat that would do a great job of protecting your truck bed. It resists most chemicals and also is raised slightly off the bed to prevent moisture build-up.

expert reply by: Andrew N

0

Answer 1

Yes, you can install the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 with the BedRug Custom Truck Bed Mat #BR44FR on your 2022 GMC Sierra 2500 with the 6-3/4' bed. You will need to make cutouts in the BedRug though for…

view full answer...

Answer 2

The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come rolled up in a box so you'll need to unroll it and let it rest…

view full answer...

Answer 3

Of the two part numbers you mentioned only the #TLF2022A is a fit for your 2022 Ford F-350 short bed without factory board and with the factory installed hitch. You might have meant to type #TLF2022 which is the non-aluminum/stainless steel option…

view full answer...

Answer 4

The strongest camper tie downs for your 2022 Ford F-350 short bed without boards and a factory hitch is the Torklift tie downs #TLF2022A and #TLF3008A which are made from aluminum and stainless steel. This also means that it would never rust or…

view full answer...

Answer 5

The steel Torklift camper tie downs that fit your 2018 Ford F-350 long bed part #TLF2021 and #TLF3008 weighs 74 lbs total whereas the aluminum version part numbers #TLF2021A and #TLF3008A weigh 66 lbs so it's about 8 lb lighter.

view full answer...

Answer 6

The difference between the Air Lift Air Shock Controller Compressor System #AL25804 and the Air Lift Load Controller II Compressor System #AL25592 is that the 25804 is the standard compressor system where the 25592 is the upgraded version that has a…

view full answer...

Answer 7

We do have great hitch extender options for trucks like your that have 2-1/2 inch hitches like the Curt part #C45048 but the #TLE1642 only fits the new Ram trucks that have 3 inch hitches. The Curt #C45048 can be used as a 34 inch extension or cut…

view full answer...

Answer 8

The BAK Revolver X4s Hard Tonneau Cover, short bed #BAK99ZR or long bed #BAK49ZR, measures about 8" when rolled up. It doesn't roll up completely up to the front so it will probably hang over the bed about 9" or 10" so you'll…

view full answer...

Answer 9

WeatherTech doesn't pre-cut the mat for the bed mounted pucks of the Ford OEM tow prep package, you'll need to cut the holes yourself. As you can see in the photo I've provided, WeatherTech clearly marks where you'd need to trim the…

view full answer...

Answer 10

Yes the Weathertech tailgate liner part #WT3TG12 is a no-drill install for your 2020 Ford F-250. The holes line up perfectly with your truck's tailgate.

view full answer...

Answer 11

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Does The DeeZee Truck Bed Mat Come Pre-Cut For Gooseneck Hitch On 2021 Ford F-350?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching