What Is The Distance Between Bolt Holes On Replacement Dometic Toilet Seat DOM23FR?

Question

Question:

Hi can you give me the dimensions of the center to center mounting holes on the DOM23FR Toilet seat, Thank you!

asked by: Dale M

0

Expert Reply:

The Replacement Wooden Toilet Seat with Slow Close Lid for Dometic Part-Timer RV Toilets - Tan # DOM23FR has mounting holes 5-1/2" from each other (see photo). This is specifically made for 310 Series Part-Timer # DOM37FR, DOM47FR, and # DOM77FR.

expert reply by: Andrew N

0

Replacement Toilet Seat DOM23FR Bolt Holes
(click to enlarge)

Answer 1

Replacement toilet floor flanges are universal so it will work, but you can determine the correct one based on the threading of your current flange. They will work with 3" pipes which you need to have as well. - Male Thread: Replacement RV…

view full answer...

Answer 2

The lid for the Replacement Wooden Toilet Seat #DOM83FR that fits on a Dometic 310 RV Toilet #DOM57FR tapers to be narrower at the top of the lid. So it will be slightly narrower than the seat itself. I have included dimensions that show the widest…

view full answer...

Answer 3

The Dometic Full-Timer RV Toilet part #DOM87FR is a great replacement option for any trailer. That said, toilets aren't make and model specific in regards to fit on a trailer. It may or may not require modifications to be used with a…

view full answer...

Answer 4

Yes, the seat on the Dometic 320 Full-Timer RV Toilet part #DOM87FR is pretty standard so you should be able to replace this with one from a local hardware store if you wish. That said, you would want to make sure you choose the one that most…

view full answer...

Answer 5

Per Dometic the Dometic Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic #DOM87FR is 8" from the center line of the drain to the front of the bowl so you should be good with your 11" distance from the shower door.

view full answer...

Answer 6

The distance from the back of the toilet to the center of the bolt holes that secure the Dometic Part-Timer RV Toilet #DOM37FR is 14-3/4 inches. The center of the bolts is inline with the center of the toilet like what you see in the dimensional…

view full answer...

Answer 7

You can corner set the Dometic Part-Timer RV Toilet (310 Series) #DOM57FR. You will need 10" as measured from the wall to the center of the hole. Please note the attached image and the installation video.

view full answer...

Answer 8

The Dometic Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic #DOM87FR has a capacity of 400-lbs. This would be the largest capacity toilet that is currently available from Dometic; this is the same size as a full household…

view full answer...

Answer 9

11 inches from the bolt hole centers to the wall of the RV is the standard dimension for installing a 2 bolt toilet like the Dometic part #DOM87FR. You might check again and see if you didn't measure from the bolt centers and instead did from the…

view full answer...

Answer 10

Based on what you described wanting the MaxxAir MaxxFan part #MA00-04751KSX is your best option. This has a 4 speed fan, a powered lift, and has no thermostat. I attached a review video for this for more info as well.

view full answer...

Answer 11

The seat height of the Dometic #DOM87FR Full-Timer RV toilet is 18-1/4 inches. I've provided a diagram with all the dimensions for reference.

view full answer...

Answer 12

Yes, the elongated ceramic bowl on the Dometic 320 Full-Timer RV Toilet, #DOM87FR matches the design of a residential toilet.

view full answer...

What Is The Distance Between Bolt Holes On Replacement Dometic Toilet Seat DOM23FR?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching