Will the Rhino Rack J-Style Kayak Carrier Fit on 3/4 Inch Round Crossbars

Question

Question:

I bought a seah universal round crossbars. Will this fit round? They are 3/4 inch round

asked by: Heather M

1

Helpful Expert Reply:

Yes. The Rhino-Rack J-Style Kayak Carrier - Folding - Universal Mount # S512 will fit on the 3/4 inch round bars that you've got.

expert reply by: Erik B

1

Answer 1

To haul you kayaks side by side I recommend picking up the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs #S512-S512X. This will fit around standard crossbars and from what I can tell it looks like the Gobi Stealth Rack you have on your 2000 Toyota…

view full answer...

Answer 2

In order to determine whether Rhino-Rack 2 Kayak Carrier #S512-S512X fits around your factory crossbars on your 2003 Volkswagen Passat wagon, you need to make sure that your crossbars do not exceed 3-1/8" wide x 1-3/16" tall. I…

view full answer...

Answer 3

I confirmed with my contact at Rhino-Rack that, yes, the 100mm width and 36mm depth shown in the attached photo from the installation manual is the maximum dimensions of crossbars that the brackets of the Rhino-Rack 2 Kayak Carrier #S512-S512X can…

view full answer...

Answer 4

While we do have a great option for your Thule T-Rac Pro2 ladder rack on your 2017 Toyota Tacoma, I confirmed that the Rhino-Rack 2 Kayak Carrier #S512-S512X does not clamp around the bars of the rack. This is because the bars of the T-Rac Pro2 are…

view full answer...

Answer 5

I have a great option for you to carry both a Hobie Mirage Outback Kayak and a Hobie Compass Kayak. In order to do so you will need to use a j-style carrier for the Compass and a saddle style carrier for the Mirage Outback. The reason for this is…

view full answer...

Answer 6

The only way to attach a Thule roof rack to your 2021 Jeep Wrangler Unlimited Hardtop is going to be with a gutter mount solution like the #TH711500 and #TH65BJ. There isn't a way to adapt a Traverse foot to the hardtop of your Wrangler.

view full answer...

Answer 7

I took a look at your order and it was the Rhino-Rack Roof Rack for Factory Tracks - 54" Bars #Y02-480B-NT which is too short for the 63 inch spacing on your truck. For that spacing you will need the following: - Rhino-Rack Roof Rack for Factory…

view full answer...

Answer 8

The etrailer Kayak Carrier w/ Tie-Downs #e98878 fit crossbars measuring up to 3-1/8" wide x 1-1/2" tall, so since your square crossbars are a little taller we need to go with a different solution, and for that I recommend the Class 2 from…

view full answer...

Answer 9

We do! It looks like you're needing the Rhino-Rack Recovery Track Carrier for Pioneer Platform Rack #RR43159-RMTXMPS which is exactly what you're asking about.

view full answer...

Answer 10

There is actually a carrier specifically for your application. Well, not vaulting poles, but 6 inch PVC pipe. Take a look at Conduit Carrier Kit # RP7054900. It fits 6 inch diameter PVC schedule 40 or 80 and this set up can be locked using a padlock…

view full answer...

Answer 11

Thank you for the photos! It looks like if you flip the Rhino-Rack J-Style Kayak Carrier #S512 so the J-Cradles are hanging out over the Prinsu rack you should be able to move the clamping mechanism further out to the side for better clearance.…

view full answer...

Answer 12

If the ARE Camper Shell already has a set of tracks installed then you can use the Rhino-Rack Vortex Crossbar System part #RRVA165B-RRRLT600 along with two sets of the Rhino-Rack J-Style Kayak Carrier part #S512 in order to carry up to two kayaks.…

view full answer...

Will the Rhino Rack J-Style Kayak Carrier Fit on 3/4 Inch Round Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching