Ball Mount For Curt Hitch C13264 on Toyota Tacoma
Question:
Hello! May be a silly question....I have had zero luck in finding a hitch ball mount that will work with my '17 Tacoma. Either the neck is too long or too short and will not line up with the hitch pin. Is there a specific one to use? I have the draw-tite Class IV hitch on my pickup. Appreciate any advice! Thanks
asked by: Josh
Expert Reply:
There isn't a specific ball mount required for the Curt Trailer Hitch # C13264 on your Toyota Tacoma. The correct one will depend on the rise or drop you need:
- 1" Rise, 2" Drop: Draw-Tite Ball Mount for 2" Hitches # 4284
- 3" Rise, 4" Drop: Draw-Tite Ball Mount for 2" Hitches # 4285
Along with the ball mount you will also need a hitch lock or pin and clip to secure it to your hitch, and a hitch ball with the correct diameter shank. For that you can use the following:
- Pin and Clip # ML1465DAT or Hitch Receiver Lock # e98880
- 2" Hitch Ball # C69FR or 2-5/16" Hitch Ball # # C40008
Products Referenced in This Question
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 12" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Long Shank
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 12" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Long Shank
- Draw-Tite
more information >
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 20000 lbs GTW
- Class IV
- Class V
- CURT
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Stainless Steel - 10K
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Master Lock Pivot Lock Hitch Pin for 2" Hitches - 5/8" Diameter - Stainless Steel
- Hitch Pins and Clips
- Standard Hitch Pin
- 3 Inch Long
- Fits 2 Inch Hitch
- 5/8 Inch Diameter
- 3 Inch Span
- Master Lock
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Hitch for a 2023 Toyota Tacoma
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Where Is the Brake Controller Plug On a 2021 Ford F-150
- Q&A: Recommended Wiring Harness For 2020 Toyota Tacoma Towing A Trailer
- Q&A: 4-Way Trailer Wiring Harness that Fits 2019 Toyota Tacoma
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Hardware Kit For Curt Trailer Hitch # C13264
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Trailer Wiring For 2020 Toyota Tacoma
- Q&A: Which Yakima Roof Rack System For 2021 Toyota Tacoma and Shell