Mounting Specifications For a 2-Wire RV Propane Gas And Carbon Monoxide Detector

Question

Question:

Do to space considerations, can the RS34FR detector be mounted in a vertical position rather than horizontal?

asked by: David W

1

Helpful Expert Reply:

The 2-Wire Carbon Monoxide Detector # RS34FR can be mounted vertically or horizontally, it does also state that it needs to be 4-18" from the floor and where it won't be obstructed to airflow.

Additionally do not mount within 12" of any opening windows, exterior doors, fans, vents, or areas with a draft. To continue, do not mount on exterior walls, within 24" of any cooking appliances, behind furniture or any areas that would block flow to the alarm, and on a wall controlled by a power line or to a circuit breaker.

expert reply by: Bryce D

1

Answer 1

Yes, the 2-Wire RV Propane Gas and Carbon Monoxide Detector, #RS54FR has two different mounting brackets to select from allowing coverage of the existing hole from previous installs. Please note the attached product review video.

view full answer...

Answer 2

The Atwood 31013 is no longer made. The best choice for replacement is the RVCO #RS34FR which mounts flush against the wall, and the overall measurements are 4-1/4" square, and it sticks out 1/2" from the wall. Works with 2-wire…

view full answer...

Answer 3

We have exactly what you are looking for. You will want the Atwood combination gas and carbon monoxide detector #AT36681.

view full answer...

Answer 4

Since the Atwood LP DOB 31013 is no longer available, your best option is to do a full replacement. I recommend going with the: -RV Propane Gas and Carbon Monoxide Detector #RS34FR for white, or the: -RV Propane Gas and Carbon Monoxide Detector…

view full answer...

Answer 5

The RV Propane Gas Detector, #RS64FR should be installed in the horizontal orientation. This comes with two mounting bracket options to help cover over holes such as you describe. These options are 7-1/4" long x 3-3/8" wide or the second…

view full answer...

Answer 6

Detectors have varying lifespans between 5 to 10 years. For instance our RVSafe #RS34FR detector has a stated 5 year lifespan. Also, effective 8-1-2009, all detectors will give an repeated audible warning when the detector has reached its end of…

view full answer...

Answer 7

I went out to the warehouse to measure Camco Olympian Wave 3 Catalytic Safety Heater part #CAM57331 and the unit no longer has the knobs and buttons on the front. The black knob is on the left side of the unit and the red switch is on the left side…

view full answer...

Answer 8

The Prest-O-Fit 3 Piece Interior RV Rug Set part #PR44ZR might survive if you put them through a washer but they recommend only spot cleaning. You could take them out and use soap and water on them in a driveway if they were really dirty.

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

I recommend the #RS34FR to replace your current LP gas detector. This is a simple 2 wire design making for easy installation.

view full answer...

Answer 11

We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV Propane Gas…

view full answer...

Answer 12

Atwood is no longer in business so you'd have to switch over to a new brand in order to get what you need. We currently only carry the RV Propane Gas #RS44FR (white #RS64FR) which comes with two different trims (large: 7-1/4" long x…

view full answer...

Mounting Specifications For a 2-Wire RV Propane Gas And Carbon Monoxide Detector

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching