Can I Bend the 3-Inch Cradles on My Swagman E-Spec in Order to Fit My 4-Inch E-Bike Tires?

Question

Question:

I got the bike rack yesterday after months of waiting. The cradles work with 3inch tires max. I have 4inch Lectric e-bike tires. Im wondering if I can bend the cradles to fit. The up-to-3inch cradles I got are very stout and the replacement option S64679 is expensive. Any ideas?

asked by: Mark Y

0

Expert Reply:

I have an answer for you. Unfortunately, we do not recommend bending the 3-inch cradles on the Swagman E-Spec Bike Rack # S94FR because this can cause damage/warping to the cradles. With 4-inch tires, I strongly recommend purchasing the Fat Tire Adapter Kit for Swagman G10 and E-Spec Bike Racks # S64679 to avoid serious damage to your current cradles.

expert reply by: Bob C

0

Answer 1

Since coupler height isn't a common measurement that is given by trailer manufacturers I don't have that information readily available but I do believe that I can still help out some. If your Winnebago Micro Minnie 2106DS weighs less than…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 7

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...

Answer 8

Hey Andy, the Swagman E-Spec part #S94FR would be able to accommodate a bike wheelbase that is 48.8 inches so it would work for you.

view full answer...

Answer 9

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 10

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 11

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...