Does the Kuat Sherpa 2.0 Have an Add-On Accessory for Additional Bikes?

Question

Question:

Am I correct that the Kuat sherpa does not have an add on option?

asked by: Jon B

0

Expert Reply:

Yes, you are correct that the Kuat Sherpa 2.0 # SH22G does not have an add-on. However, if you are looking for a similar rack that has the add-on capability, I recommend the Kuat NV 2.0 Bike Rack for 2 Bikes # NV22G along with the 2-Bike Add-On for Kuat NV 2.0 Bike Rack # NA22G.

expert reply by: Bob C

0

Answer 1

The only bike rack that you can add onto that is like the Kuat Sherpa #SH22G is the Kuat NV #BA22B by using this add on #BA02B.

view full answer...

Answer 2

Yes, you will have no issues using the Kuat Sherpa 2.0 Bike Rack for 2 Bikes item #SH22G with the 2" receiver on your 2022 Subaru Outback. This bike rack can carrier two bikes with a capacity of 40 lbs per bike. The rake itself weighs 41 lbs so…

view full answer...

Answer 3

What size hitch do you have? Is it a 2 inch opening or a 1-1/4 inch opening? If it's a 2 inch opening you can use a hitch extension with the Kuat Sherpa 2.0 part #SH22G but you will be cutting the capacity of the hitch by 50 percent. This hitch…

view full answer...

Answer 4

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 9

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 10

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 11

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 12

Hi Tracy, We can for sure get you a 3-bike rack for your ebike with a step-thru frame and two regular bikes. This is especially doable because your ebike is on the lighter side at just 40 lbs, and with that in mind what I recommend is a rack from…

view full answer...

Does the Kuat Sherpa 2.0 Have an Add-On Accessory for Additional Bikes?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching