Replacement Electric Over Hydraulic Disc Brake Kit For Triple Axle Enclosed Car Hauler
Question:
CAN THE DISC BRAKE CONVERSION BE USED ON TORSION ALXES ? ENCLOSED CAR HAULER ? WHAT IS THE DIFFERANCE IN OFF SET ? IF SO WHAT PACKED FOR 7000LB TRIPLE AXLE
asked by: JOEY C
Expert Reply:
Yes, the HydraStar Disc Brake Kit # HSE7K-TR1 can be used with triple axles on an enclosed car hauler.
As this kit uses a hub/rotor combination your off set will stay the same as opposed to kits that use a rotor that slides onto a separate hub.
The kit includes all 6 brake assemblies with an 8 on 6-1/2" bolt pattern and 1/2" wheel studs. You will need to verify that this is what your current hubs use so that you will not need to change your wheels. Also you should verify that you have Inner Bearing # 25580 (1.75" inner diameter), Outer Bearing # 14125A (1.25" inner diameter) and a Grease Seal # GS-2250DL (2.25" inner diameter). If you have the axle serial number or infromation from the axle tag I can verify that you do have all the correct components. All the universal brake lines and a brake actuator is also included with hardware for mounting.
You will also need to ensure that your brake controller is compatible with the 3 electric over hydraulic braking axles. The Tekonsha Prodigy P3 # 90195 is a great option if your current controller is not compatible.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 1/2" Studs - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- Hydrastar
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Triple Axle Disc Brake Conversion Kit
- Q&A: Are the MORryde Wet Bolts Compatible With Equa-Flex Equalizers on 2018 Momentum 395M?
- Q&A: How To Run Steel and Rubber Lines For Disc Brakes In Trailer
- Q&A: What is the Difference Between the HSE7K-TRI and HSE7K-TR1SO
- Q&A: Hydraulic Brake Kit For a Ez 4 Kaufman Car Hauler Trailer With 7,000LB Axles
- Q&A: Parts to Convert 2017 Grand Design Momentum 376TH to Electric Over Hydraulic Disc Brake
- Q&A: Recommended Brakes, Bearings and Seals for Dexter 10k General Duty Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class