B&W Gooseneck Hitch Fit For 2010 Dodge Ram 2500 Mega Cab Short Bed
Question:
Im looking for a BandW turn over gooseneck hitch that will fit a 2010 dodge ram 2500 mega cab with a 72 inch bed. The trailer is 8 foot wide and has 9.5 inch from front nose of trailer to center of the ball connection. Will a GNK1313 work and will I need a extension to move it back as not to hit the cab?
asked by: Drew
Helpful Expert Reply:
We do indeed have a B&W Turnoverball gooseneck hitch that fits your 2010 Dodge Ram 2500 Mega Cab with a short bed. I verified with the manufacturer that the Turnoverball hitch that fits your truck is the following:
- B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1308
This hitch is specifically for the Mega Cab version of your Ram; the GNK1313 you mentioned does NOT fit the Mega Cab. In regards to the extension, since you have a short bed, I do highly recommend using an offset hitch ball for additional turning clearance:
- 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches # BWGNXA4085
Even with an offset ball you won't be able to make a 90 degree turn due to having a short bed, but the added clearance will absolutely be helpful for you.
I also wanted to mention that along with the hitch and offset ball, the only other thing you'll need for your Ram is a gooseneck wiring harness if you don't have one, with the correct fit being the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole # PK11893-11932.
Products Referenced in This Question
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Manual Ball Removal
- 7500 lbs TW
- 30000 lbs GTW
- Removable Ball - Stores in Hitch
- Wheel Well Release
- 2-5/16 Hitch Ball
- B and W
more information >
4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches
- Trailer Hitch Ball
- Gooseneck Hitch Ball
- Turnover Ball
- 4 Inch Offset
- Powder-Coated Steel
- 2-5/16 Inch Diameter Ball
- 20000 lbs GTW
- B and W
more information >
Product Page this Question was Asked From
Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7-1/2 Feet Long
- Custom Fit
- 7 Round - Blade
- Pollak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Ram Trailer Tow Prep Package
- Q&A: Recommended Air Bags for a 2011 Ford F-350 w/ a Gooseneck Hitch
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Trailer Wiring Diagrams
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: Recommended In-Bed 7-Way Connector for a 2024 Chevy Silverado 2500
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Pollak 7-Way # PK11893-11932 Wiring Diagram
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: What Does B and W Turnoverball Gooseneck BWGNRK1320 Weigh
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Q&A: Recommended Sidewinder Pin Box For A 2025 Keystone Cougar 2700BH