How to Determine Tailgate Clearance of 2019 Ford F-350 With B&W Companion Slider For Puck System
Question:
I have a 2019 Ford F350 with the 6-3/4 ft bed. How close will my morryde rubber pinbox come to the tailgate when the hitch is in the rearward sliding position? I am concerned about clearance. Also, how do I measure to ensure the tailgate of the F350 will open without contacting the fifth wheel when the hitch is in the forward position?
asked by: Jeff M
Expert Reply:
While we don't have those numbers, we can tell you exactly how to determine the clearance you'll have from your pin box to the tailgate of your 2019 Ford F-350 with the B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package # BWRVK3370.
The Companion # BWRVK3370 will slide 12 inches from the when in the sliding position (you can use the gooseneck hole in your truck and measure 12 inches from that closer to the tailgate) and the hitch will sit a maximum of 19 inches high, which is taller than most. Then you'll want to put your 5th wheel trailer in position like you were coupling, and measure to the closest part of your pin box.
This can be somewhat tricky to do without the hitch so it may not be 100 percent exact, but the measurements should be close and give you a good idea of what kind of clearance you have. You will want to have at least 6 inches of clearance, and if you don't, I highly recommend a 5th wheel tailgate for your 2019 Ford F-350:
- Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Ford Trucks # VG-15-4000
This tailgate has a cut out in the middle that will allow the needed clearance from the pin box for your truck. I have added a link below to a video review for you to check out as well if you'd like to take a look.
Products Referenced in This Question
Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Ford Trucks
- Tailgate
- Truck Tailgate
- Fifth Wheel Tailgate
- With Lock
- Louvered Tailgate
- Composite Plastic
- Stromberg Carlson
more information >
Product Page this Question was Asked From
B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual Jaw - 20K
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- OEM - Ford
- 5000 lbs Vertical Load
- 20000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 17 - 19 Inch Tall
- 12 Inch Fore/Aft Travel
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Fifth Wheel Tailgate Recommendation for 2019 Ford F-250
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: Will B&W Companion Slider Base For Ford Fuper Duty Puck System Fit B&W Companion Head For Chevy
- Q&A: How to Determine Correct Height Setting for 5th Wheel Hitch
- Q&A: Comparing Rota-Flex and Gen-Y 5th Wheel Pin Boxes
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Why Is a 10" Lube Plate Recommended for a B&W Companion Instead of 12"
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: What 5th Wheel Hitch Do You Recommend For My 2022 Ford F-350 Super Duty With Tow Package
- Article: Ram Trailer Tow Prep Package
- Article: How Do Portable Generators Work? A Beginner's Guide to Powering Your Life
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Best 2021 Trucks for Towing a 5th Wheel