Replacement Hub and Drums For PJT Trailer With 008-393-03 Installed
Question:
I HAVE A PJT TRAILER I NEED 3 HUBDRUMS FOR- THE BRAKE SHOES HAVE A TAG ON THEM - 23-428 AND 23-429. THE DRUM HAD A TAG 008-393-03 IS THIS THE SAME AS YOUR 8-393-4UC3?
asked by: RICK K
Helpful Expert Reply:
Thanks for all of the information on your PJT Trailer!
Based on your drum part number you have a 12-1/4" Drum that is oil bath. The Dexter # 8-393-4UC3 is almost right, but it is designed for grease and not oil.
You will need the # 8-393-4UC3 and oil seal # 10-63 for each hub. This hub does not include the bearings so you will also need new inner bearing # 25580 and outer bearing # 02475 for each hub.
If you need replacement brakes now or in the future you will need # 23-428-429 for each axle.
I included a few video reviews for you to take a look at.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 02475
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 02475
- Race 02420
- 8000 lbs Axle
- etrailer
more information >
Unitized Oil Seal for Trailer Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- Dexter
more information >
Dexter Electric Trailer Brakes - Parking Brake Ready - 12-1/4" - Left/Right Hand - 7.2K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12-1/4 x 2-1/2 Inch Drum
- 7200 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 7,200-lb Axles Manufactured After 1999 - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 02475
- For 7200 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: coupler lock
- Shop: Dexter Trailer Hub and Drum Assembly for 7,200-lb Axles Manufactured After 1999 - 8 on 6-1/2
- Shop: Demco Composite eZ-Latch Repair Kit for 2-5/16" Ball Cast Couplers
- Shop: Buyers Products Tail Light Mounting Box - 6" Oval Hole - Black Powder Coated Steel
- Search Results: 13472
- Search Results: 5504
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Replacement Surge Hydraulic Brake Actuator Recommendation To Replace Atwood 82541
- Shop: Brake Controller
- Search Results: 19~135
- Search Results: 23~026
- Shop: Americana Metal, Bolt-In Valve Stem - 1-1/4" Long
- Search Results: apubr~1
- Search Results: oval light mounting boxes
- Shop: Rack'Em Manufacturing Removable Wheel Chock
- Shop: Dexter Trailer Hub and Drum Assembly - 8,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Floor Mats
- Q&A: Replacement Hub and Drum Assembly Recommendation for 8K Dexter Axle Brakes
- Q&A: Recommended Wheel for 008-393-06 Dexter Hub
- Q&A: Looking For Drum Brakes That Fit An 8,000 Pound Axle
- Shop: Trailer Wiring
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Solution for Needing Replacement Parts for Atwood Surge Brake Coupler
- Shop: Trim Kits
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: Integrated Factory Brake Controller on 2008 Chevy Silverado 2500 Not Recognizing Trailer or Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 13-117-03 Review