Which Rhino-Rack Pioneer Platform Rack Will Fit Onto Rhino-Rack Vortex Aero Crossbars?

Question

Question:

I have this installed on my 2006 Ford F-150 Super Crew truck a Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59inch Long. I would like to know if this Pioneer Platform is compatible with the Vortex Aero Crossbars I have installed: Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60inch Long x 56inch Wide Item # RR42113BF.

asked by: Randall D

0

Expert Reply:

I have a solution for you, but the now discontinued Rhino-Rack Pioneer Platform Roof Tray 60" Long x 56" Wide
RR42113BF that you were looking at is not compatible with the Vortex Crossbars you have installed on your F150. Instead, I recommend looking at the Rhino-Rack Universal Pioneer Platform Rack for Crossbars 58" Long x 47" Wide # RR42115BF which certainly is compatible with your Vortex Crossbars.

I attached a demonstration video for you to check out.

expert reply by: Andrew N

0

Answer 1

I have a solution for you. Rhino-Rack offers replacement end caps with keys for their Vortex Aero Bars. The Rhino-Rack #RRVA-SEC4 will include 4 new end caps and 2 plastic keys. However, I would get remove your current plastic end caps and install…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 7

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 8

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 9

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 12

While we do have some T-Bolts #RR72XB which will fit into the TS Rails for TruXedo Elevate Rack System #TH65FR. I recommend using the hardware which comes with the Tie-Down Kit #TH52FR since the kit comes with 8 T-Bolts as well as washers and nuts.…

view full answer...

Which Rhino-Rack Pioneer Platform Rack Will Fit Onto Rhino-Rack Vortex Aero Crossbars?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching