Tools Required To Install A Draw-Tite Receiver # 75600 On a 2018 BMW X5
Question:
I recently just bought this for a 2018 X5 and was curious what tools and/or extra parts like rivets I need to get ahead of the install?
asked by: Aaron B
0
Expert Reply:
The tools that you need to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75600 on your 2018 BMW X5 are as follows.
-Heavy duty utility knife(for trimming the bumper fascia)
-Center punch
-5/32" rivet tool
-10mm socket
-18mm deep well socket
-Torque Wrench
New rivets are included with the receiver and you will reuse the factory flange nuts for mounting the bumper.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 600 lbs TW
- 6000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Comparing etrailer and Draw-Tite Trailer Hitch Receivers For a 2024 Subaru Forester
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Mounting Options For 7-Way Trailer Connector On a 2015 BMW X5 35D M Sport
- Q&A: How to Remove the Rear Bumper Fascia for Installing Draw-Tite # 75600 on a 2018 BMW X5
- Article: Trailer Hitch Receiver Sizes
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Hitch Receiver For a 2014 BMW X5 35i Which Does Not Require Removal Of Impact Structure
- Q&A: Removing Rear Bumper Fascia from a 2012 BMW X5 For Draw-Tite Trailer Hitch Installation
- Q&A: Towing Capacity and Hitch Recommendation for 2013 Honda Accord Coupe and CVT Transmission
- Article: Trailer Maintenance Schedule
- Article: Top Gifts for Dads in 2024
- Article: How to Measure for Trailer Hitch Drop