Replacement Mounting Hardware for Sears X-Cargo Roof Cargo Carrier

Question

Question:

so how many straps total do i need for a sears X cargo ?

asked by: David A

0

Expert Reply:

We do in fact have the replacement hardware for your Sears X-Cargo carrier but it does not use straps like the # SR02918 that you mentioned.

You will need the Replacement Hardware Kit for Searsbox Cargo Box # TH05603 which includes everything you need to get your Sears X-Cargo back on the road.

expert reply by: Jameson C

0

Answer 1

The Replacement Mounting Strap with Buckle for SportRack Explorer Cargo Box #SR02918 should great for your X-Cargo roof box. These straps are 1" wide x 40-3/4" long and many people have used them on X-Cargo carriers. You will want 4 of…

view full answer...

Answer 2

We do have a replacement latch that has been known to work for the older models of the Sears X-Cargo rooftop boxes. What you need is the Replacement Latch for SportRack Explorer Cargo Box 03347. I have added a photo a customer sent in showing this…

view full answer...

Answer 3

I may have a solution for you but we don't carry the hooks to connect the old X-Cargo boxes that used the straps. Like you mentioned we have the straps, part #SR02918, which are 1 inch wide. We also have some clips for RightLine Gear cargo bags,…

view full answer...

Answer 4

You will need four of the replacement mounting straps for your Sears X Cargo Box: - Replacement Mounting Strap #SR02918

view full answer...

Answer 5

The Replacement Hardware Kit for Searsbox Cargo Box #TH05603 is most likely not what you need. Without knowing exactly what version of box, it is difficult to confirm a fit, but it is more likely the Replacement Mounting Hardware for X-Cargo Sport 20…

view full answer...

Answer 6

The mounting hardware you need is found in the Replacement Master Parts Bag for X-Cargo Model 28 Cargo Box #TH04870 to give you all the other hardware. If you just want the latch in addition to the mounting hardware, you can use the Replacement Latch…

view full answer...

Answer 7

The Replacement Mounting Strap part #SR02918 should allow you to mount the Sears Cargo Box to the roof of your 2018 Nissan Murano. The straps are 1" wide x 40-3/4" long and will run through the doors along the inside roof of the vehicle. If…

view full answer...

Answer 8

The Sears X-Cargo Cargo Box has been discontinued for awhile and replacement parts are no longer available. The Replacement Mounting Strap part #SR02918 is designed to run through the doors along the inside roof of the vehicle. If you would like to…

view full answer...

Answer 9

I am not aware of any direct fit mounting hardware kits available for the Sears X Cargo Roof Mounted Cargo Boxes due to their age. As you mentioned, you will need to drill holes in order to mount it onto a set of crossbars. The u-bolts kits are…

view full answer...

Answer 10

We actually offer a replacement hardware kit for the Sears X-Cargo boxes like what you have with the part #TH05603. This comes with everything you'll need to mount on your roof rack.

view full answer...

Answer 11

I do have an option for you but there are no replacement parts available for the Karrite Road Rider Cargo Box due to its age. I am also not aware of any type of strap that will work in place of the original mounting straps. Therefore, the best option…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Mounting Hardware for Sears X-Cargo Roof Cargo Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching