Replacement Hardware Kit For a Westin HDX Grille Guard On a 2017 Ram 2500

Question

Question:

Which install kit do I need ? I believe I have a Weston hdx that fits a 2017 Ram 2500.Thanks.

asked by: Jimmy M

0

Expert Reply:

You do appear to have the Westin HDX Grille Guard # 57-3555 for your 2017 Ram 2500. The Replacement Hardware Kit # 57-355PK includes all new hardware and mounting brackets to be able to mount the Grille Guard on your Ram.

expert reply by: Bud M

0

Customer Image 1
(click to enlarge)

Customer Image 2
(click to enlarge)

Answer 1

To install the Westin HDX Grille Guard with Punch Plate - Black Powder Coated Steel #57-3555 you purchased on your 2018 Ram 2500 you will need the Replacement Hardware Kit for Westin HDX Grille Guards 57-3550 and 57-3555 #57-355PK which includes all…

view full answer...

Answer 2

I attached a picture that shows what the Westin HDX Grille Guard #57-3555 looks like when installed on a 2013 Ram like your 2500 model. It looks like the divider bar is below the headlamps.

view full answer...

Answer 3

The mounting brackets you need are part #57-229PK. They're specifically for the Westin HDX grille guard, part #57-2295 on your 2010 GMC Sierra 1500.

view full answer...

Answer 4

Assuming you have the Westin HDX #57-3550 or #57-3555 Grille Guard, you'll need the #57-355PK replacement hardware kit. I looked up the vehicle fits, and the 2018 Ram 3500 and the 2014 2500 use the same HDX Grille Guards. Keep in mind that not…

view full answer...

Answer 5

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 6

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 7

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Replacement Hardware Kit For a Westin HDX Grille Guard On a 2017 Ram 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching