Display on Curt Venturer Brake Controller Intermittently Displays Red Lights
Question:
So when I’m driving with my trailer when I’m just driving the lights on the controller kinda randomly go from green to red and then I press on the brake and the green bars come up I’m not sure what the problem is it’s my first time using it it came with the truck when I bought it I just now have a trailer with trailer brakes thanks for any help-
asked by: Corban R
Expert Reply:
Since it's an intermittent sort of problem, I'm suspecting a loose connection somewhere. If the red dot on the LED display is lighting up, it indicates that the vehicle has lost the electrical connection to the trailer brakes. The most common cause for this is a dirty or damaged 7-way on the vehicle or the trailer. Closely examine the sockets and pins of the 7-way trailer connector, on both the trailer and the vehicle side of the equation. Look for bent pins or green/white corrosion on the pins. If you see corrosion on the pins, there's a good chance that the corrosion has spread to the interior of the connector where the wires attach to the terminals and are interfering with the signal from reaching the trailer brakes.
You'll also want to examine the brake output circuit on the trailer (typically a blue wire). Make sure all connections are sound. Each brake magnet has two wires exiting it. One should be securely grounded to clean metal on the trailer frame, the other should be securely connected to the brake output circuit.
I've linked to an article that provides more information on troubleshooting brake controllers.
Product Page this Question was Asked From
Curt Venturer NEXT Trailer Brake Controller - 1-3 Axles - Time Delayed
- Trailer Brake Controller
- Time Delayed Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 3 Axles
- LCD Display
- Up to 360 Degrees
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 7-Way Trailer Wiring Harness for 2024 Hyundai Santa Cruz
- Q&A: How Does Curt TriFlex NEXT Brake Controller Mount
- Article: Trailer Wiring Diagrams
- Q&A: Mounting Panel For Redarc Tow-Pro Liberty on 2007 Toyota Tacoma
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Parts Needed to Install the Prodigy P3 Brake Controller on a 2024 Honda Pilot
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch
- Article: Using a Portable Generator on RV
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: Which Connector Is Needed To Install Curt Spectrum Trailer Brake Controller On a 2018 VW Atlas?
- Q&A: Recommended Air Bag Kit For A 2024 Toyota Tundra