Recommended Tow Bar Cover For A Blue Ox Ascent Non-Binding Tow Bar

Question

Question:

Do you know the part number and price for a cover for this unit ?

asked by: Jcole

0

Expert Reply:

The correct over for your Blue Ox Ascent Non-Binding Tow Bar - Motorhome Mount - 2-1/2" Hitch - 7,500lbs Item # BX4375 is the Blue Ox Tow Bar Cover - Ascent and Avail Item # BX88309. This weather-resistant cover blocks rain and road grime when your tow bar is folded up behind your RV. Custom-fit design makes it easy to get on and off.

expert reply by: Kevin C

0

Answer 1

The Blue Ox Ascent Tow Bar - Motorhome Mount - 2" Hitch - 7,500 lbs #BX4370 has arms 2 inches longer than most. I reached out to my tech contact who said when the legs are in it is 44” from receiver pin to holes on triple lug. When fully…

view full answer...

Answer 2

Any adapter you use to get your Blue Ox Ascent Tow Bar - Motorhome Mount - 2-1/2" Hitch - 7,500lbs Item #BX4375 into a 2" x 2" receiver will reduce the towing capacity by 50% which would make flat towing unsafe. You either need to…

view full answer...

Answer 3

Blue Ox does not have multiple color options for their tow bar covers like what fits your Ascent #BX4370. Only option would be the part #BX88309.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, the Curt Custom Base Plate Kit #C36JR is confirmed to fit your 2020 Ford Expedition 4wd. It will also allow for you to use a Blue Ox Tow Bar #BX7420. Do ensure you install a Charge Line Kit #RM-156-25 as the battery will while being flat towed…

view full answer...

Answer 6

Yes, you do. The wiring that comes with the Blue Ox Accessory Kit item #BX88308 only controls your towed vehicle's lights. You will need to add the Roadmaster Battery Charge Line Kit item #RM-156-25.

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Yes, we have the Thule Wingbar Evo roof rack part numbers #TH711520 and #TH33ZR that fits your 2023 Jeep Wrangler Unlimited that has the one touch roof. The Wingbars are the quietest and most aerodynamic bars out there so we recommend them highly.

view full answer...

Answer 9

We have a couple of different options that will work with your Sky One-Touch power top but I'd say the best option is going to be with Thule's aerobar setup. You'll need the following components: Thule WingBar Evo Crossbars #TH711520…

view full answer...

Answer 10

Hello, Phil. Yes, the bolts that go into the adapters at the end of the arms should be torqued. It looks like those are 5/16" grade 5 bolts so they should be torqued to 18 ft lbs. I have included the torque chart below for your reference.

view full answer...

Answer 11

To flat tow your 2012 Scion xB behind an RV you will need the base plates and tow bar like you mentioned as well as safety cables, lighting, and supplemental braking. For a tow bar compatible with Roadmaster base plates #1187-1A (with arm height at…

view full answer...

Recommended Tow Bar Cover For A Blue Ox Ascent Non-Binding Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching