Which Adapter Bar Do I Need for My Bike

Question

Question:

I need a cross piece for my bike because it doesnt have a cross bar. Which one do you reommend please. thanks

asked by: Frank K

0

Expert Reply:

For your bike, it sounds like you are looking for an adapter bar. The correct adapter bar will be dependent on the distance from the handle bar tube to the seat post. For example the Swagman Bike Frame Adapter Bar # S57FR has a useable length of 25" - 31" so as long as that matches the measurement of your bike then this would be a great option.

If the above distance is not within that range just let me know.

expert reply by: Samuel C

0

Where To Trim Bumper On 2021 Lexus RX 350
(click to enlarge)

Answer 1

The only way you'd be able to carry an 80 lb e-bike with a 2010 Toyota Prius would be to first install a 2 inch hitch on the vehicle like with the EcoHitch part #306-X7178 so that you could then carry an e-bike rack with a higher weight…

view full answer...

Answer 2

The Hollywood Racks E-Bike Carrier part #HLY84FR that you referenced can carry bikes with 20 inch wheels. It will work great to carry your Rad Mini step through bike.

view full answer...

Answer 3

The Hollywood Racks Sport Rider SE Bike Rack part #HLY84FR is an excellent bike rack option with 80 lb per bike weight capacity. It has a lifetime warranty and comes with locks for both the bikes and racks.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 11

Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Which Adapter Bar Do I Need for My Bike

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching