Recommended Bearing Kit And Spindle Nut For 2008 Coachmen Adrenaline Blast W/ Lippert 3500lb Axle
Question:
Hi. I need a complete wheel bearing kit, including washer and spindle nut for a Lippert 3500 lb axle NV# 121021 Could you tell me which bearing kit i need? ...and the part number for the nut and washer? This axle is on a 2008 Coachmen Adrenaline Blast 210MPH Thank you!
asked by: Johnny
Helpful Expert Reply:
We have just what you are looking for.
Starting with the bearing kit you will need the Bearing Kit # BK2-100 which includes inner bearing # L68149, outer bearing # L44649, grease seal # 10-19, the races, washer, and cotter pin for the 3500lb Lippert axle on your 2008 Coachmen Adrenaline Blast 210MPH, but does not include the castle nut.
For a castle nut 3500lb axles typically use a 1" diameter nut but you will want to measure your spindle to be sure. If this is the case then you will need Spindle Nut # 165686.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels