Fit of Kodiak XLPROLUBE1980KIT on 3500 lb Spindles With 171255 Grease Seal
Question:
I think this is what I need just want to make sure and not order wrong. My old seal number is TMC 171255TC bearings are L68149 inner L44649 outer old grease cap just a tick under 2inch with tape measure. By the way I read the info the 1980 kit should be what I need correct? Thanks for your time.
asked by: Ron K
0
Expert Reply:
The # XLPROLUBE1980KIT is compatible with a 3500 lb spindle that uses the L68149 inner/L44649 outer bearing and the 171255 grease seal, so it'll work great for you.
You can view a product description video by clicking the provided link.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Kodiak XL ProLube Kit for 3500-lb Axles
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 1.98 Inch
- Kodiak
more information >
Continue Researching
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Q&A: Replacement 250-031468 Seals Needed for Reliable Oil Bath
- Shop: D Washer for EZ Lube Spindles
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Replacement Seal for Kodiak XL ProLube Kit for 3500-lb Axles
- Search Results: bearing buddy
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Search Results: bearing buddy 1.980
- Search Results: high temp bearing grease
- Search Results: lock tight
- Search Results: oil bath hubs
- Search Results: dexter drum 8 247
- Search Results: loctite
- Q&A: Can 3,500 lb Grease Hubs be Converted to Oil Bath
- Q&A: How Tight Should Castle Nut be on Trailer Hub
- Q&A: What Grease Does The Pre-Greased Trailer Hub and Drum Assembly AKHD-545-35-K Use?
- Q&A: What Grease Comes with Grease Gun # L30132
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: After Installing New Hubs Do You Have to Break Them In
- Video: Fulton Sidewind Bolt-Thru Swivel Marine Jack Review
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: Performance Tool Carbon Fiber Digital Caliper Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub