Replacement Bearings, Races and Grease Seals For A 2002 Karavan Boat Trailer
Question:
I am looking at the BK1-150 kit for both sides of my roughly 2002 karavan pwc trailer. When I measured the axle it looks like it takes a 34823 RG06-010 seal instead of the seal in this kit. Is it possible to swap out the 2 seals in this kit for the RG06-010 seal kit or do you have to just buy them both separately and waste the seals that are not needed. I went through all of the bearing kits I could find on the site and it did not seem like there was one with the L44649 bearings for inner and outer with the correct size seal.
asked by: Corey R
Expert Reply:
The Bearing Kit # BK1-150 contains the bearings, races and grease seal commonly found on a BTR Spindle.
The Bearing Kit # BK1-100 contains the bearings, races and grease seal commonly found on a BT8 Spindle.
It appears that your spindle on your 2002 Karavan PWC Trailer uses a combination of the two kits. As we do not have an exact kit with the components that you need you can acquire all the parts individually. You will need the following parts for both hubs on your axle.
4- # L44649 Bearings
4- # L44610 Races
2- # 34823 Grease Seals
And if you have a EZ lube spindle 2- Spindle Washers # 5-101, or 2- Cotter Pins # 165649 for a standard castle nut spindle.
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Suspension Parts
- Cotter Pin
- ABS Fasteners
more information >
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine the Correct Bearings for PWC Trailer
- Q&A: What is the Difference Between Load Range B and C Trailer Tires of the Same Size
- Search Results: karavan trailer parts
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: Are Bearings L44549 and L44649 Interchangeable
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Tell if 10K Dexter Nev-R-Adjust Electric Trailer Brakes Are for Driver or Passenger Side
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision