How Many Sets of the L-Shaped, Bolt-On Brackets # PF775-BKT-2 are Needed to Install 2 Fenders
Question:
Does each fender F008554 require 1 set 2 PF755 Brackets??? Need to know if I need to order 2 sets of brackets for bother fenders??
asked by: Tom
Expert Reply:
I spoke to my contact at Redline and he confirmed that the Galvanized Steel, L-Shaped, Bolt-On Brackets # PF775-BKT-2 are sold in pairs and are designed for 1 fender.
Basically each fender requires 2 brackets, so the # PF775-BKT-2 is enough for one fender. Since you are looking to install 2 fenders you would need to order a quantity of 2 of these.
Also, this is the correct bracket kit for the Fulton Plastic Fender # F008554 that you referenced.
Products Referenced in This Question
Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 14" Wheels - Qty 1
- Trailer Fenders
- Top Step
- 14 Inch Wheels
- 9-3/4 Inch Wide
- 30 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- Fulton
more information >
Product Page this Question was Asked From
Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W - Qty. 2
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 4 Inch Wide
- Brackets
- 7 Inch Tall
- Redline
more information >
Continue Researching
- Article: Boat Trailer Guides: Which are the Best?
- Q&A: Replacement Trailer Tires with Load Range E
- Q&A: Mounting Brackets For CE Smith Single Axle Trailer Fenders With Top and Side Steps
- Q&A: Recommendations For Increasing Fender Clearance With Larger Tires On a Single Axle Boat Trailer
- Q&A: Upgrading Leaf Springs on a Trailer with a 3500 Pound Axle
- Q&A: Can the Leaf Springs Be Upgraded On a Lippert 3,500 Lb Axle
- Q&A: How to Determine the Capacity of Trailer Leaf Springs and How to Raise the Coupler Height
- Article: Rust Prevention
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Fenders Needed for a 13" Wheel on a Tracker Trailstar Boat Trailer
- Article: Trailer Lighting Requirements
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Which Hitches are Made in the USA
- Article: Boat Trailer Showdown: Bunks vs. Rollers