Recommended Trailer Bearings for Big Tex 50LA-12 Trailer
Question:
I have a BIGTEX 50LA TANDEM AXLE 12FT. I NEED TO BUY BEARINGS FOR IT
asked by: Quincy T
Expert Reply:
In order to find the right bearings more information is required. The easiest way to find which bearings you need is to remove the hub and check for the numbers that should be stamped into the bearings. If you are unable to locate these numbers, another option is to take measurements on the trailer spindle at the bearing seat locations. Attached is an image that shows where the measurements need to be taken. I recommend using a digital caliper like # PTW80157 to acquire accurate measurements.
Looking up the trailer it appears as though you have 3,500 lbs axles on this trailer. Best guess, you would need # BK2-100 Bearing Kit for #84 Spindle, L44649/L68149 Bearings. It is still recommended that you measure to verify. Once you find the bearing numbers or spindle dimensions I will be able to recommend the correct bearings for your Big Tex 50LA trailer with certainty.
I have also attached some articles about bearings you may find helpful.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Braking Assemblies for a Big Tex 50LA Utility Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00