Camper Tie-Downs for 2021 GMC / Chevy 2500

Question

Question:

Im looking for a Happijac tie down system for a 2021 model year GMC Sierra 2500 HD. From what I can see, the kit looks like it will fit. Im not sure if the L bracket that bolts through the box and frame will line up for a 2020+ model year vs. the 2014-2019 model year. Happijac doesnt list a kit to the 2020+ model year. Please advise.

asked by: SG

0

Expert Reply:

Currently there is not an option for the 2021 GMC Sierra 2500 HD available from Happijac. My recommendation is the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs, # TL44XR for the rear, will work with either the 8' bed or the 6-3/4'. Use either the # TL73QR or # TL43QR for the front depending on 8' bed or the 6-3/4'. I suggest using the guide to select apropriate options for specific vehicle, bed length, with/without board and hitch etc.

I prefer this option of mounting to the frame as it helps to better distribute the weight of a truck camper. And that these tie-down inserts can be easily removed from their frame-mounted receiver brackets when you are not using the truck camper.

expert reply by: Michael R

0

Answer 1

I have a solution for an adjustable ball mount that is compatible with the GMC MultiPro tailgate, but there is not one that has a specific 5" drop position. It appears you were looking at the B&W Tow & Stow for MultiPro Tailgates…

view full answer...

Answer 2

I contacted Tech Support at Roadmaster to verify fitment, they confirmed that the Roadmaster Rear Anti-Sway Bar, #RM25FR, 1109-101, is the correct item for your 2021 GMC Sierra 2500HD. They also confirmed that proper installation does use a…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 6

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Camper Tie-Downs for 2021 GMC / Chevy 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching