Replacement 4 on 4 Bolt Pattern Hub Compatible With 1.063 Inch Straight Spindle
Question:
I have a Cummins boat trailer for a 14foot boat that has a threaded 4x4 hub with a 1-1/16inch spindle and 4 screw in lugs. I looked all over the web and cannot find a replacement hub kit?
asked by: J. G
Expert Reply:
A 1.063 straight spindle is compatible with an L44649 bearing. I'd recommend the Dexter # 8-91-05UC1-EZ hub as a replacement. The hub has a 4 on 4 bolt pattern and is compatible with the L44649 inner and outer bearing.
Since your current hubs use lug bolts, it's considered hub-centric, which means that the lugs merely hold the wheel onto the hub, but the portion of the hub that extends through the pilot diameter of the wheel provides much of the load support to carry the weight of the trailer. The hubs we offer that would be comtpabile like the # 8-91-05UC1-EZ I mentioned are lug centric hubs, which means the hub's wheel studs support the vertical load of the trailer.
You might need to replace your existing wheels if the pilot diameter is less than 3.19 inches and the wheels don't have the 60º bevel or taper around the opening for the lug nuts to center the wheel.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Best Boat Trailer Jacks
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: Trailer Hub Recommendation for Hub on Trailer with 1-1/16" Spindle Diameter
- Q&A: Comparing Trailer Tire Sizes 16.5x6.5-8 and 165/65-8
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure a Trailer Axle