Where Does Ground Wire On Trailer Taillight Attach
Question:
What do I do with the 6inch piece of ground wire coming out from trailer lights?
asked by: Frank
Expert Reply:
You'll want to ground that wire to the trailer frame, or to a piece of metal that's securely attached to the trailer frame. I'd recommend installing a ring terminal like # DW05702-1 to the end of the wire and using a self-tapping screw to attach it to the trailer frame or metal that's in direct contact to the trailer frame. I'd recommend sanding the area around where you're going to attach the ring terminal down to bare metal, and installing a star washer between the ring terminal and the surface you're attaching it to. The washer will get a good bite into the metal, providing a secure and reliable connection.
Products Referenced in This Question
Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Wiring
- Wire Connectors
- Ring Terminals
- 1/4 Inch Diameter
- 16-14 Gauge
- Deka
more information >
Continue Researching
- Shop: Epicord Battery Disconnect Switch with Key - 50 Amp
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: MORryde RV Cargo Sliding Tray - 72" x 48" - 2 Way Slide - 80 Percent Extension - 500 lbs
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Shop: MORryde RV Cargo Sliding Tray - 72" x 48" - 1 Way Slide - 60 Percent Extension - 800 lbs
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Q&A: Troubleshooting Right Side Turn Signal Not Working On Trailer
- Q&A: Troubleshooting No Power On Curt 4-Way Wiring Harness
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Search Results: 4 pin mounting bracket
- Q&A: How To Attach A Ground Wire To Trailer Frame
- Search Results: battery switch
- Q&A: Preferred Method of Grounding Trailer Lighting Circuits
- Video: Review of Curt 4-Pole Flat Trailer Wiring Mounting Bracket - C42CR
- Video: Epicord Battery Disconnect Switch with Key Review and Installation
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56272 Review
- Shop: Trailer Wiring
- Video: Camco RV Plastic Water Pressure Regulator Review
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: brake controller