What is the Length of the Rhino-Rack T-Load Hitch Mounted Load Assist?

Question

Question:

I want to know How tall it extends to? It only lists the width. I have a Ford F-150 FX4 and its way up in the air. My Yakima rack is track mounted on a cab level Snugtop camper shell. I cant get near that hight with this bulky Kaku Wahoo 10.5. It weighs 68 lbs. This thing needs a boom hoist! I need a measurement from the hitch to the top of the shell at least. Rack is 4 inches higher. After trying to put it up with a suction cup roller bar, I couldnt get it to the roller below the shell top.

asked by: Mark Y

0

Expert Reply:

The adjustable height range of the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar for 2" Hitches - 49" Long # RTL002 is 42-64 inches high. In order to make sure that the Rhino-Rack T-Load will clear your camper shell and reach your crossbars, I recommend measuring the pinhole of your hitch receiver to the top of your shell. The Rhino-Rack T-Load hitch is not used for a lift assist.

However, if you are looking for a higher load assist for your Kaku Wahoo, I recommend the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs # RR-RUSL. The vertical mast of the Load Assist telescopes from 35-5/8 inches to 87-1/8 inches tall. The Load Assist will allow you to hoist your Kaku Wahoo onto your Yakima crossbars.

For a kayak carrier recommendation for your Yakima crossbars, I recommend the Malone Deluxe Kayak Carrier with Tie-Downs - Foam Block Style - 18" Long # MPG152. The Deluxe Kayak Carrier 2 block straps, 2 cam buckle load straps, and 2 bow/stern ties to secure you Kaku Wahoo to your 2006 Ford F-150.

expert reply by: Bob C

0

Answer 1

While we have an option for you, from the photos I've seen, the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH59FR looks to extend ever so slightly past the tow hooks. So what I recommend instead for your F-250 is a front hitch from…

view full answer...

Answer 2

Since most of the bed on your 2019 Ram 2500 will be off limits when towing a 5th wheel trailer, the best solution for also transporting your canoe will be with a front mount hitch and roof rack setup. Starting with the front hitch, I highly recommend…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Answer 7

Yes, the Truxedo Elevate Ladder Rack System part #TX96NV does fit your 2024 Chevy Silverado 5-3/4 foot bed that has the bed protection package. It will so work with the BAKFlip MX4 tonneau part #BAK448130 as well.

view full answer...

Answer 8

The etrailer Hitch #e98912 comes with four 1/2-13 x 1 1/2 carriage bolts.

view full answer...

What is the Length of the Rhino-Rack T-Load Hitch Mounted Load Assist?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching