Weight Distribution Trailer Hitch Recommendation For a 2007 Chrysler Pacifica
Question:
Will this work on my 2007 Chrysler Pacifica Touring with 4.0 Liter Engine
asked by: David S
Expert Reply:
Yes, the Curt MV Weight Distribution System # C17050 will work with your 2007 Chrysler Pacifica. This hitch is rated for trailers with a tongue weight of 500-600lbs and a maximum weight of 6,000lbs. Be sure not to exceed the weight limits given by Chrysler for your vehicle.
I recommend using a Equal-i-zer Weight Distribution System # EQ37060ET. With this style weight distribution you get the added benefit of sway control to help keep your trailer tracking straight when driving on the highways. It applies force to the trailer to reduce the movement caused by windy conditions and large trucks. You will not need to remove this type of sway control to back up your trailer. This hitch is rated for trailers with a tongue weight of 200-600lbs and maximum weight of 6,000lbs.
A 1-7/8" 12pt Thin Walled Socket # ALL643216 is needed to install the included 2" hitch ball. If you have a different size coupler please let me know and I will find you the correct ball.
The Sway Bracket Jackets # EQ95-01-5150 help to reduce the amount of noise the hitch makes when you are maneuvering and will also help your components last longer. These nylon spacers reduce the metal on metal contact on the trailer brackets.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Brackets
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 500 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Can You Reverse with the 6K Curt MV Weight Distribution System
- Q&A: Is There a Trailer End 4-Round With Wires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Q&A: Weight Distribution System For A 2020 Kia Telluride Towing a 5,000 lb Trailer
- Q&A: Weight Distribution Recommendation for 600 lb for Combined Trailer Tongue and Rear Tow Vehicle Cargo