What Ladder Rack will Work with My BAKFlip MX4 Tonneau Cover on My 2019 RAM 1500?

Question

Question:

I currently have a BAKFlip MX4 Hard Tonneau Cover installed on my 2019 Ram 1500 Crew cab.............Is there a rack that will work with this tonneau cover? Thanks

asked by: Doug S

0

Expert Reply:

For a compatible ladder rack that works with the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK448227 (for the 5-1/2 foot bed without Rambox) and # BAK448223 (for the 6-1/2 foot bed without Rambox), I recommend the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500 lbs # A70450 (for 5-1/2 foot beds without Rambox) or the # A70480 (for 6-12 foot bed without Rambox). Since the BAKFlip MX4 attaches inside of your bed's rails, the Adarac Custom ladder rack will mount unobstructed into the truck's stake pockets. If you need straps to secure your cargo onto the rack, I recommend the SmartStraps Ratchet-X Ratchet Tie-Down Straps w/ S-Hooks - 1" x 14' # 348345.

expert reply by: Bob C

0

Answer 1

It looks like you are referring to the Thule Xsporter Pro Truck Bed Ladder Rack - Aluminum - 450 lbs - Black #TH500XTB which is confirmed to fit the 2021 GMC Sierra 1500 with the 5-3/4', 6-1/2', and 8' bed. A similar Yakima version would…

view full answer...

Answer 2

The Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500lbs #A70450 mounts in the stake pockets of your 2020 Ford F-250's bedrails so it will be compatible with tonneau covers that mount on the inside of the bedrails like…

view full answer...

Answer 3

I have the perfect solution for you with the TruXedo Elevate Truck Bed Rack System #TX46NV. It's compatible with your BAKFlip MX4 tonneau cover and the towers adjust to either 18" or 28" tall. It has multiple mounting points for the…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...