Front Trailer Hitch for 2020 GMC Sierra AT4 1500 Diesel

Question

Question:

In this question you mention that the hitch does not fit the diesel models of the Sierra 1500 AT4: 519415 Is there a hitch that will fit the diesel models?

asked by: Dave M

0

Expert Reply:

The Draw Tite Front Hitch part # DT44HR is a confirmed fit for the 2020 GMC Sierra that has the diesel engine like what you have.

expert reply by: Jameson C

0

Answer 1

The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR is confirmed to fit your 2021 GMC Sierra 1500 with the 3.0L diesel engine. This receiver is rated for a vertical load up to 500lbs and a line pull rating of up to 9,000lbs. This Draw-Tite uses…

view full answer...

Answer 2

There are multiple front mount trailer hitch options for a 2019 Chevy Silverado 1500, the Curt part #C31088 and Draw-Tite part #DT44HR. The Draw-Tite was designed to work on 2.7L Turbo or 3.0L Diesel engine models whereas the Curt is incompatible at…

view full answer...

Answer 3

Our fitguides get updated regularly when we get new information from our techs after they do installs. There has been a revision to the fitment of the Curt item #C31088 front end hitch on the 2021 GMC Sierra 1500's. It no longer fits and the…

view full answer...

Answer 4

When installed on your 2019 GMC Sierra 1500 the Curt Front Mount Trailer Hitch #C31088 will extend close to even with the front bumper under the truck. I have attached an image of the hitch installed on your truck that you can use for reference. We…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Yes, we sure do! I recommend our own branded etrailer Trailer Hitch Receiver #e79AR. This has the common 2" opening for many accessories and ball mounts. It is coated in our matte black finish so that it blends in well with the OEM appearance…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Front Trailer Hitch for 2020 GMC Sierra AT4 1500 Diesel

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching