Replacement Trailer Hub Assembly That Uses Bearing Sizes 15123, and 25580
Question:
Is this Hub compatible with my trailer I need to replace the hubs in the outer bearing number is 4t - 15123, inner hub bearing 25580.
asked by: Robert K
Expert Reply:
The CE Smith Trailer Idler Hub Assembly # CE13611 will not fit your trailer with the hub bearings 15123 and 25580.
Your hub bearings are most commonly found in 6,000lb axles and will require one of the following hubs.
etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K for an EZ Lube axle
etrailer Trailer Idler Hub Assembly # AKIHUB-655-6-K for a standard spindle
Both of these hub assembly's will include new inner and outer bearings and races, lug nuts, grease caps, and a 2.25" inner diameter grease seal. If your hub uses a different size grease seal let me know and I will recommend the correct part. Both have the 6 on 5-1/2 lug pattern which matches what you saw in the CE Smith hub.
The Bearing Buddy Bearing Protectors # BB2441SS can be added to the standard spindle kit to allow you to easily add grease to the wheel bearings without the need to disassemble the hub.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.441 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Recommended E-Z Lube Hub and Rotor Assembly for 6K Axles
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Tire Sizing
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Recommended Replacement Brakes for TDE 46304 Brakes
- Q&A: Replacement Trailer Bearing for L44640
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Timbren Axle-Less Trailer Suspension System w/ Electric Brake Hubs to Replace 2800 lbs Dexter Axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer