Temp Sensor On The Furrion Chill RV Air Conditioner Built In Thermostat

Question

Question:

Where does the temp sensor go or mount for this ductless system?

asked by: Jmiller

0

Expert Reply:

The Furrion Chill RV Air Conditioner and Air Distribution Box w/ Built-in Thermostat - 13,500 Btu Item # FR52PR doesn't have a temperature probe or sensor to control the unit. The temperature knob ranges from 61 degrees to 86 degrees.

expert reply by: Kevin C

0

Furrion Temperature Knob
(click to enlarge)

Answer 1

The Furrion Chill Replacement RV Air Conditioner part #FR58PR is just an overhead unit that is designed to replace an existing unit. In order to obtain the rest of the parts needed to do a complete install you'l need the controller part…

view full answer...

Answer 2

Furrion Chill Replacement RV Air Conditioner for Coleman Setup #FR42PV comes with a wiring harness adapter so that you can plug into your current RV air conditioning system without having to completely replace it. It has a BTU rating of 15,000…

view full answer...

Answer 3

If you use the Furrion Chill adapter part #C-FACR15SA-A01 you can easily install a Chill AC 15k unit part #FR86PR in place of your Dometic Brisk using the same ducting and electrical connections. This will allow your current thermostat and controls…

view full answer...

Answer 4

You're correct, setting 1 on the Furrion RV Refrigerator #FCR14ACBQABL thermostat would be the warmest and setting 5 would be the coldest.

view full answer...

Answer 5

We do have replacement lift brackets that will work perfectly with your Pro Series Weight Distribution System w Friction Sway Control 49903, though not ones that are weld on. Instead, the correct replacements are the Replacement Lift Brackets with…

view full answer...

Answer 6

The Furrion Chill HE RV Air Conditioner System - Manual - 13,500 Btu - White #FR52PR is 34-7/8" long x 27-9/16" wide with the front on the unit being almost lined up with exactly with the cutout hole in your RV's roof. I spoke with a…

view full answer...

Answer 7

The Replacement Premium Wall Thermostat for Furrion Chill HE RV Air Conditioner #FR33PR is the more premium wall controller for your Furrion Chill HE setup. This wall controller has a digital display that shows your settings, has 5 operations mode…

view full answer...

Answer 8

I've got a 6-pin switch option for you with the #37212835. This is the same DPDT (Double Pole Double Throw) style as your current switch. The plate it is installed in is a different design, but you should be able to remove the new switch from…

view full answer...

Answer 9

I do have a handful of things that you can check to help keep your Furrion 15,000 AC Unit like part #FR58PR from cycling. Start off checking some of the easy stuff like the air filter and your wiring connections. Clean or change out the air filter if…

view full answer...

Answer 10

Your Furrion Chill Replacement RV Air Conditioner for Furrion Setup - 15,000 Btu - Black #FR86PR is definitely not functioning correctly. We haven't seen this issue yet with that model, but it isn't uncommon that air conditioners when they…

view full answer...

Answer 11

The Honda 2,000 Watt EU2200i Generator which I believe is what you have is rated for up to 18.3 amps and the Furrion Chill Rooftop RV Air Conditioner part #FR52PR only needs 14.6 amps for startup so they will work with one another. The required amps…

view full answer...

Answer 12

I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of…

view full answer...

Temp Sensor On The Furrion Chill RV Air Conditioner Built In Thermostat

Product Page this Question was Asked From

Continue Researching