What Thule SR Ladder Rack Will Fit My 2018 RAM 2500?

Question

Question:

Is there a thule Sr rack that will fit my truck?

asked by: Hansen

0

Expert Reply:

We do currently have a Thule SR Ladder Rack that fits your 2018 RAM 2500. If you have a 6-1/2 bed (without Rambox), I recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-501. If you have an 8-foot bed, I recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-000.

The great thing about the Thule SR Ladder Rack is that it mounts in the stake pockets in your truck without interfering with the inside of your bed rails. This capability makes it great to pair up with a tonneau cover that uses the truck's rails. If you want a suggestion about a tonneau cover that is compatible with the Thule TracRac SR Ladder Rack, I would be happy to make a recommendation.

expert reply by: Bob C

0

Answer 1

There is only one tonneau cover that we have determined as a compatible with the Thule TracRac SR and that is the BAKFlip Revolver Series. Which TracRac and tonneau cover you will need depends on the length of the bed. Assuming that you've got an…

view full answer...

Answer 2

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

view full answer...

Answer 3

We have just what you need. Since you have a BAK Revolver tonneau cover we do have sliding ladder racks that will fit with it and your 2018 Ram 2500 well. The Revolver is one of the very few tonneaus we know can fit with ladder racks. If you have a…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 6

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 7

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 8

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 9

Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…

view full answer...

Answer 10

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 11

From your question it sounds to me like someone has cut off the tow package plug on your 2005 Ford F-150 and wired in a 4-way connector. In this case you could use the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole, #37185 which will give you a 4-way…

view full answer...

Answer 12

I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest…

view full answer...

What Thule SR Ladder Rack Will Fit My 2018 RAM 2500?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching