Roller Shaft Length Required For Yates 10 Keel Roller and Yates End Caps For Boat Trailer
Question:
What roller shaft length is needed for a Yates 10inch roller with two Yates end caps?
asked by: Brad P
Expert Reply:
For the Yates Keel Roller # YR1000Y with the Yates Endcap # YR135-5Y on both sides you will need a 5/8" roller shaft.
I recommend the Roller Shaft with Pal Nuts # CE10727A. This shaft has an end length of 13" and includes 2 pal nuts. The endcaps are each 1" in length and have a recessed area to accept the pal nuts. To make up the 1" difference you can either cut 1" off the length of the shaft or add Flat Washers # 1140357 on each side of he endcaps allowing you to use the longer shaft. The washers will also aid in ensuring the endcaps spin freely on the shaft and do not catch on the steel brackets of the roller frame.
![Bud M](https://images.etrailer.com/static/images/catg/people/2449_tn.jpg)
Products Referenced in This Question
Flint Hill Goods Flat Washer - 5/8" Diameter - Qty 1
- Accessories and Parts
- Boat Trailer Parts
- Trailer Hitch
- Trailer Suspension Parts
- Weight Distribution Hitch
- Hardware
- 5/8 Inch Diameter
- Washers
- Flat Washer
- Flint Hill Goods
more information >
Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8"
- Boat Trailer Parts
- Rollers
- Roller Shafts
- 5/8 Inch Diameter
- Zinc-Plated Steel
- 13 Inch Long
- CE Smith
more information >
Yates Endcap for Boat Trailer Rollers - TPR - 5/8" Shaft - Qty 1
- Boat Trailer Parts
- Rollers
- End Cap
- 1-1/8 Inch Wide
- 3-1/8 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
Yates Keel Roller for Boat Trailers - TPR - 10" Long - 5/8" Shaft
- Boat Trailer Parts
- Rollers
- Keel Roller
- 3-1/8 Inch Diameter
- Thermoplastic - Non-Marking
- 9-3/4 Inch Long
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Roof Rack
- Shop: Replacement M8 x 16 mm Square Head Bolt for Rhino-Rack Accessories - Qty 4
- Shop: Universal Awning Fit Kit for Rhino-Rack Vortex Aero, Heavy-Duty Crossbars, and Pioneer Platforms
- Shop: Flint Hill Goods Locknut - 1/2" Diameter - Zinc Plated Steel - Qty 1
- Shop: Replacement Stainless Steel T-Bolt for Thule or DeWalt Contractor Truck Rack
- Shop: Thule Xadapt8 AeroBlade and Xsporter Load Bar Adapter for Criterium Bike Rack
- Video: Review of Rhino Rack Replacement M8 x 16 mm Square Head Bolts - RR93XB
- Video: Thule Xadapt12 Watersports Adapter Review
- Shop: Adapter Kit for Rhino-Rack RTL600 Legs - Yakima Tracks - Qty 12
- Video: Thule TracRac and Xsporter Ladder Racks Replacement M8 T-Bolt Review
- Shop: Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4
- Video: Rhino-Rack Sunseeker Awning Mounting Brackets Review
- Video: Review of Thule Replacement Stainless Steel Contractor Truck Rack T-Bolt - 853-5648
- Video: Thule Roof Rack XADAPT8 Review
- Q&A: Recommended Replacement M6 Square Head Carriage Bolt With Flange Nut
- Q&A: What are the Measurements of the Head of Replacement Square T-Bolt for Thule Xadapt12
- Q&A: Dimensions Of Replacement M8 T-Bolt For Thule Ladder Rack
- Q&A: M6 x 22mm T-bolts for Thule THXadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge Bars
- Q&A: Is There a Longer Replacement T Bolt Than the Thule 853-5648
- Q&A: Dimensions of T-Bolts in the Thule XADAPT12 Kit
- Q&A: What is the Square Head Dimensions of Thule Square Head T-bolts
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Ladder Rack
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Shop: Tonneau Cover