2021 Jeep Gladiator Ladder Rack And Tonneau Fit Options

Question

Question:

I’m trying to find a combination that will work with the Jeep Gladiator. I was thinking of using the truck hero TS rail system and getting the Yakima adjustable overhaul system. I wanted to confirm that the Yakima overhaul would work with with those. Also, what cover would go with that combo. I’ve been searching for quite awhile and I’m finding some conflicting information. Thank you.

asked by: Erich

0

Expert Reply:

According to Yakima, their Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover, part # Y01151-5855, will only work with specific tonneau covers, those being the Retrax XR, Pace Edwards UltraGroove. Neither of these tonneau covers fit your vehicle. I do have a combination that will work for your.

The TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black, part # TX523201, is a tonneau cover that will work with your 2021 Jeep Gladiator. It is a roll up tonneau that requires no tools to install.

It can be paired this with the Adarac Aluminum M-Series Custom Truck Bed Ladder Rack, part # A67ZR. It is a low profile ladder rack with a 500lb maximum weight limit. Since it is a low profile ladder rack it will make loading your bikes onto your rooftop bike accessory easier.

I have included links below.

expert reply by: Mark Smith

0

Answer 1

For your 2017 Ford F-250 with a Retrax XR cover, you can use the Yakima OutPost HD Overland Truck Bed Rack w/ Tonneau Cover Adapter #Y01152-5855 (for mid-height) or #Y01151-5855 (for above cab height). These racks will work with your Retrax XR…

view full answer...

Answer 2

I have a solution for you, but the Track Mount RLTF Legs #RLTF you mentioned are not a fit in Truck Hero rails; additionally those rails are not designed to fit on your 2020 Jeep Gladiator. When it comes to compatible tonneau covers and ladder…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 8

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 11

Thanks for reaching out, Roy! The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover #LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have…

view full answer...

Answer 12

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...