Determining Correct Weight Distribution Hitch For Towing W/ 2005 Toyota Sequoia
Question:
Im new to all this: I have a Toyota Sequoia, 2005. Will this system work with it, and does it addresses sway issues as well? Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW Item # C17050
asked by: Jim J
Expert Reply:
The Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW # C17050 you were looking at very well may work with your 2005 Toyota Sequoia, but to confirm this you will need to verify the total tongue weight of your setup.
Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your vehicle. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like the # e99044 but there are other methods outlined in the included help article.
As long as your total tongue weight falls between 500-600lbs the # C17050 will work just fine. This hitch does not included a hitch ball or sway control so you will need 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286, and sway control # 17200.
If your tongue weight is a bit lower then I recommend going with the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600 which works with total tongue weights between 250-600lbs and has built in two point sway control so you will not need to purchase sway control separately. This hitch also does not include a hitch ball so you will still need 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286.
I included a few video reviews of the products mentioned for you to take a look at.
![Samuel C](https://images.etrailer.com/static/images/catg/people/2240_tn.jpg)
Products Referenced in This Question
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Fastway
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 500 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Can You Reverse with the 6K Curt MV Weight Distribution System
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Q&A: Weight Distribution System For A 2020 Kia Telluride Towing a 5,000 lb Trailer
- Q&A: Best Timbren Suspension Kit for a 2024 Toyota Tundra
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does Weight Distribution Lower Tongue Weight on Hitch of Tow Vehicle