Does the Edge Pulsar L5P Inline Tuner Feature Speed Limiter Adjustment

Question

Question:

Ive read on several reviews and comments that the pulsar cannot adjust the stock speed limiter on a vehicle as edge claims is this true or false I have a 2018 chevy silverado 2500 hd duramax L5P

asked by: Melvin D

0

Expert Reply:

I spoke with Edge about the Pulsar L5P Inline Tuner with Insight CTS3 Monitor, part # EP29YR. They confirmed that this does in fact feature speed limiter adjustment.

The confusion probably stems from the fact the the V1 version of the Pulsars did not have this feature. The V2 and V3 versions do, though. This particular one is a V2, so you can rest assured that this the speed limiter adjustment.

expert reply by: Kef G

0

Answer 1

The internal dimensions of the NOCO Commercial Grade Battery Box #329-HM426 are 14-5/8" long x 10-1/2" wide x 11-1/2" tall. The dimensions of the Trojan T-105 batteries are 10.30 inches wide, 7.11 inches deep, and 11.07…

view full answer...

Answer 2

To wire two 6-volt batteries in series to produce 12-volts, you would connect the load to the positive terminal of battery #1. Connect the negative terminal of battery #1 to the positive terminal of battery #2. Ground the negative terminal of…

view full answer...

Answer 3

I have a solution for you. Unfortunately, the Superchips Flashpaq F5 #SU2845 only works with the 6.0L v8 engine on 2019 GMC Sierra 2500 HD models. With that being said, the tuner that will provide you with a lot of the same type of tunes as the…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

According to B&W the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1020 is about a 2 hour install by a professional. All the Hardware is provided. I have attached the installation instructions so you…

view full answer...

Does the Edge Pulsar L5P Inline Tuner Feature Speed Limiter Adjustment

Product Page this Question was Asked From

Continue Researching