Fit of Wheel Mounting Pad on Face of Trailer Hub
Question:
Trailer wheel hub 5x4.5inch B.C. L44643 bearings. Spindle dia 1.0. The trailer came with original hubs with a ROUND 5.5inch O.D. flange. It also came with new hubs with a STAR shaped 5.5inch O.D. flange. The question is about the amount of contact between the hub flange and the wheel. I have 2 sets of wheels/tires 12inch and 13. The wheel to hub contact area is the same on both sets of wheels. On the star shaped flange only the very outer corners of the starinch next to the wheel studs touches the wheel. Im talking about maybe .100inch at best, just in the corners. This seems wrong but I dont know the engineering behind the design and cant find any information. Will it work or be dangerous. Photos: Closeup of lug hole with scribe marks where hub sits. Hub installed with feeler gauge. Actually I may have just answered my own question. When I tightened the lug over the feeler gauge in the photo the wheel center pulled down against the hub. That makes me less concerened. Thanks, I know this a little long winded.
asked by: John A
Expert Reply:
Products Referenced in This Question
Dexstar Steel Spoke Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Recommended Replacement Hubs for Harbor Freight Trailer
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Can Jayco Pop Up Trailer with 4 Lug Hubs be Swapped to 5 Lug Hubs
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub for DICO 45264
- Q&A: Will the CE Smith Roller-Style Guide-Ons Fit an EZ Loader Boat Trailer with 4 Inch Tall Frame
- Article: Trailer Tire Sizing
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Mike L.
5/7/2021
Hi, it looks like you are using a hub centric wheel with a lug-centric hub. A hub centric wheel relies on the portion of the hub that extends through the wheel's pilot hole to provide the support. In this instance, it's not super-crucial that the mounting pad of the wheel sits perfectly flat against the hub face. With a lug centric wheel, it's VERY important that the wheel sits perfectly flat. Long story short, I would NOT use that wheel on that hub. For a 12 inch wheel, I'd use something like # AM20132.