Black Water Waste Valve Replacement

Question

Question:

I need the black water tank valve

asked by: Ken

0

Expert Reply:

LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 72" Cable
Item # 34466N4AB72GMA is the replacement for black water tank valves and comes with the extension cable you were interested in to help open your valve if it's in a hard to reach place.

expert reply by: Kevin C

0

Answer 1

Using PVC (white pipe) between ABS fittings (black) is not usually an optimal setup on a trailer because of the movement during transport and colder temperatures can cause PVC to break more easily. The Oatey Purple is a PVC primer and not a glue so…

view full answer...

Answer 2

The plan you have sounds logical, I contacted the manufacturer to inquire about any additional information they may have that would assist in addressing the issue with your LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank,…

view full answer...

Answer 3

Thank you for the photos! Based on that it looks like you have a spigot to hub black water tank valve, like you mentioned, where the hub end fits over one pipe and the spigot end fits into the other pipe. So for a spigot to hub replacement valve with…

view full answer...

Answer 4

Since the placement of the blank waste valve handle makes it hard to operate I recommend switching out the valve with a cable actuated valve that will allow you to place the handle exactly where you need it. The LaSalle Bristol Cable-Actuated RV…

view full answer...

Answer 5

What I think you are asking is if you can replace within a current system, a valve assembly of one manufacturer with that of another. Yes, the fitment of valve assemblies is industry standard in dimensions. A Valterra 3" can be replaced with a…

view full answer...

Answer 6

Remove the locknut from the cable housing assembly of the #34466N11AB96GMA. Feed the cable through the mounting bracket or hold in the wall of chassis. Feed the locknut back over the cable and fasten securely to the backside of the bracket or wall.…

view full answer...

Answer 7

The gasket is the portion of the gate valve that's allowing waste water to leak through and not actually the gate. Both companies are using a rubber gasket that will eventually fail so it really comes down to the other features of the gate valve…

view full answer...

Answer 8

To attach the Valterra Eccentric Tank Reducer #T1041-1 to the rest of the plumbing on the RV and prevent leaks use the Valterra ABS Solvent Cement #A05-0303. It was made for exactly this purpose!

view full answer...

Answer 9

The Valterra Eccentric Tank Reducer, part #T1041-1, is installed with cement. When you reinstall the new one use #A05-0303. The cement is permanent so you're not going to be able to break it up. Instead you need to cut the pipes after removing…

view full answer...

Answer 10

We've checked with LaSalle Bristol in the past and they do not offer just the replacement cables for their valves so you'd need to go with an all new valve with part #34466N4AB72GMA.

view full answer...

Answer 11

Hey Gene, we don't have that exact one you're looking for but we do have the Vitrifrigo C85i RV Mini Fridge with Built-In Freezer #VT34FR which is 3.2 cubic feet, runs off of 12V power, and does include a built in freezer.

view full answer...

Black Water Waste Valve Replacement

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching