Spare Wheel/Tire for Malone LowMax Trailer

Question

Question:

Hi, I just bought a Malone LowMax but the retailer didnt have a spare. Im about to tow my kayaks cross country with it at the end of May and I cant find anyone with the spare in stock. Is there another wheel and tire that would do in a pinch? Thanks.

asked by: Sarah

0

Expert Reply:

We have the replacement spare for the Malone LowMax available with the part # MAL23FR that you referenced.

expert reply by: Jameson C

0

Answer 1

The Spare Tire for Malone LowMax Trailer, #MAL23FR is a 20" diameter x 8" wide tire that is for the LowMax Sport trailer. It works with the MPG595, MPG596XB2, MPG596XJ2, MPG596XJ4, MPG596XKB, MPG596XSRP, or MPG596XV2 models. If you have one…

view full answer...

Answer 2

When it comes to picking a spare tire and wheel combo first we would need to know what your bolt pattern is. Please follow the link below to figure out the correct measurement. There are 3 options of bolt patterns, I will put the tire and wheel…

view full answer...

Answer 3

Yes. The Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style - Folding - 1 or 2 Kayaks #Y04073 are designed to fit on virtually any crossbar, including the square bars on the Malone SteelTop Roof Rack - Square Crossbars #MPG201 you were…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Spare Wheel/Tire for Malone LowMax Trailer

Product Page this Question was Asked From

Continue Researching